What is the benefit of this switch? Although outdated a lot of posts talking about uImage vs zImage seems to favor uImage due to additional functionality that it provides.
> On Sep 23, 2013, at 9:28 PM, "Denys Dmytriyenko" <[email protected]> wrote: > > From: Denys Dmytriyenko <[email protected]> > > * To be used with latest u-boot, that prefers zImage over uImage > > Signed-off-by: Denys Dmytriyenko <[email protected]> > Cc: Tom Rini <[email protected]> > --- > conf/machine/include/omap-a15.inc | 2 +- > conf/machine/include/ti33x.inc | 2 +- > conf/machine/include/ti43x.inc | 2 +- > 3 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/conf/machine/include/omap-a15.inc > b/conf/machine/include/omap-a15.inc > index 623f2df..aba122a 100644 > --- a/conf/machine/include/omap-a15.inc > +++ b/conf/machine/include/omap-a15.inc > @@ -10,7 +10,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging" > PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging" > PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging" > > -KERNEL_IMAGETYPE = "uImage" > +KERNEL_IMAGETYPE = "zImage" > > UBOOT_ARCH = "arm" > UBOOT_ENTRYPOINT = "0x80008000" > diff --git a/conf/machine/include/ti33x.inc b/conf/machine/include/ti33x.inc > index 12b80c6..7f02042 100644 > --- a/conf/machine/include/ti33x.inc > +++ b/conf/machine/include/ti33x.inc > @@ -23,7 +23,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging" > PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging" > PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging" > > -KERNEL_IMAGETYPE = "uImage" > +KERNEL_IMAGETYPE = "zImage" > > UBOOT_ARCH = "arm" > UBOOT_MACHINE = "am335x_evm_config" > diff --git a/conf/machine/include/ti43x.inc b/conf/machine/include/ti43x.inc > index 62da105..adb66e3 100644 > --- a/conf/machine/include/ti43x.inc > +++ b/conf/machine/include/ti43x.inc > @@ -23,7 +23,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging" > PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging" > PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging" > > -KERNEL_IMAGETYPE = "uImage" > +KERNEL_IMAGETYPE = "zImage" > > UBOOT_ARCH = "arm" > UBOOT_MACHINE = "am43xx_evm_config" > -- > 1.8.3.2 > > _______________________________________________ > meta-ti mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-ti _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
