Do you have a complete boot log?
On Fri, Aug 31, 2018 at 05:55:53PM +0000, Patkar, Sarvesh S. wrote: > Hi Denys, > > Thank you for the quick reply. > > I tried the core-image-base. I see the following on the console. > > root@beaglebone:~# lsusb > unable to initialize libusb: -99 > > fdisk doesn't list the USB device as well. > > Is there anything else that I can try? > > Thanks, > Sarvesh > > -----Original Message----- > From: Denys Dmytriyenko [mailto:de...@ti.com] > Sent: Thursday, August 30, 2018 7:42 PM > To: Patkar, Sarvesh S. <sarvesh.pat...@thermofisher.com> > Cc: meta-ti@yoctoproject.org > Subject: Re: [meta-ti] BeagleBone Black: cannot access USB MSC devices > > > Please don't use core-image-minimal (e.g. core-image-base is much better), if > you want to get anything useful out of it, besides just booting, including > such tools as fdisk, lsusb, etc. Thanks. > > > On Fri, Aug 31, 2018 at 02:16:09AM +0000, Patkar, Sarvesh S. wrote: > > Hi, > > > > I am a beginner in Yocto and still learning to configure the images > > generated. > > > > I am trying to use USB devices with the BeagleBone Black (Rev C) . > > Specifically, I want to access a Mass Storage Class Device (a USB > > Flash > > Drive) from the BeagleBone Black. I used the meta, meta-poky and > > meta-ti layers to build a core-image-minimal image for beaglebone > > machine. On booting up with the image, I do not see any obvious > > errors. However, it cannot detect the presence of a USB Device > > connected to it. I checked this using fdisk -l. lsusb command is not found. > > > > I went through an old email chain > > https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.yoctoprojec > > t.org_pipermail_linux-2Dyocto_2014-2DJune_002787.html&d=DwIBAg&c=q6k2D > > sTcEGCcCb_WtVSz6hhIl8hvYssy7sH8ZwfbbKU&r=kLMtB9EeaG0D8_vJ7xCDnkGx5TX9d > > c8pLS0HaMWl2-A&m=ZnXiBdSvO_0jYV33nEuRQrF7tLzUs8TgUM7hBC6IchQ&s=nMXUhOH > > LBBgCs7EOynlKAfyBNTlmCSJFY8uJm1C3cAY&e= > > to find if there was a solution. One of the things mentioned was to > > use menuconfig to configure the kernel for built-in USB support. But, > > I am not sure if the .config file is being picked up by bitbake. > > > > How do I enable USB support for MSC devices on BeagleBone Black? > > > > poky branch= sumo-19.0.0 > > meta-ti branch= ti2018.02 > > > > Thanks for the help! > > Sarvesh > > > > > -- > > _______________________________________________ > > meta-ti mailing list > > meta-ti@yoctoproject.org -- _______________________________________________ meta-ti mailing list meta-ti@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-ti