On Tue, Jul 02, 2019 at 03:42:03PM -0500, Jonathan Bergsagel wrote: > Adds the R5 and DSP echo_test firmware binaries to be > used for testing Linux IPC on J721E SOCs. > > Signed-off-by: Jonathan Bergsagel <jbergsa...@ti.com> > --- > recipes-bsp/ipc-lld/ipc-lld-fw_git.bb | 148 ++++++++++++++++++++++++++ > 1 file changed, 148 insertions(+) > create mode 100644 recipes-bsp/ipc-lld/ipc-lld-fw_git.bb > > diff --git a/recipes-bsp/ipc-lld/ipc-lld-fw_git.bb > b/recipes-bsp/ipc-lld/ipc-lld-fw_git.bb > new file mode 100644 > index 000000000000..75dd0e93cb8e > --- /dev/null > +++ b/recipes-bsp/ipc-lld/ipc-lld-fw_git.bb > @@ -0,0 +1,148 @@ > +SUMMARY = "R5 and DSP IPC Echo Test Firmware Packaging recipe"
The summary is for the content, i.e. the firmware, not the recipe. > +LICENSE = "TI-TFL" > +LIC_FILES_CHKSUM = "file://LICENSE;md5=7eae093f2b09fd39307f30028a068b91" > + > +inherit deploy > +inherit update-alternatives [snip] > +ALTERNATIVE_PRIORITY = "10" > + > +# copy the executables in the deploy directory > +# after the build, they will be available under > +# build/arago-tmp-external-arm-toolchain/deploy/images/j7-evm/ The above path is not always the same, so it's better not to mention it - everyone knows where deployed images are. Or if you must, you can substitute parts of it with variables, e.g. TMPDIR, DEPLOY_DIR, etc. > +do_deploy () { > + install ${R5_DSP_FW_DIR}/ipc_echo_test_mcu1_0_release.xer5f ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_mcu1_0_release.strip.xer5f > ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_testb_mcu1_0_release.xer5f ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_testb_mcu1_0_release.strip.xer5f > ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_mcu1_1_release.xer5f ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_mcu1_1_release.strip.xer5f > ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_testb_mcu1_1_release.xer5f ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_testb_mcu1_1_release.strip.xer5f > ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_mcu2_0_release.xer5f ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_mcu2_0_release.strip.xer5f > ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_testb_mcu2_0_release.xer5f ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_testb_mcu2_0_release.strip.xer5f > ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_mcu2_1_release.xer5f ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_mcu2_1_release.strip.xer5f > ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_testb_mcu2_1_release.xer5f ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_testb_mcu2_1_release.strip.xer5f > ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_mcu3_0_release.xer5f ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_mcu3_0_release.strip.xer5f > ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_testb_mcu3_0_release.xer5f ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_testb_mcu3_0_release.strip.xer5f > ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_mcu3_1_release.xer5f ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_mcu3_1_release.strip.xer5f > ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_testb_mcu3_1_release.xer5f ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_testb_mcu3_1_release.strip.xer5f > ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_c66xdsp_1_release.xe66 ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_c66xdsp_1_release.strip.xe66 > ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_c66xdsp_2_release.xe66 ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_c66xdsp_2_release.strip.xe66 > ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_c7x_release.xe71 ${DEPLOYDIR}/ > + install ${R5_DSP_FW_DIR}/ipc_echo_test_c7x_release.strip.xe71 ${DEPLOYDIR}/ > +} > +addtask deploy after do_install before do_build > + > +# This is used to prevent the build system to strip the executables > +INHIBIT_PACKAGE_STRIP = "1" > +INHIBIT_SYSROOT_STRIP = "1" > +# This is used to prevent the build system to split the debug info in a > separate file > +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" > +# As it likely to be a different arch from the Yocto build, disable checking > by adding "arch" to INSANE_SKIP > +INSANE_SKIP_${PN} += "arch" > + > +# we don't want to configure and build the source code > +do_compile[noexec] = "1" > +do_configure[noexec] = "1" > -- > 2.17.1 > > -- > _______________________________________________ > meta-ti mailing list > meta-ti@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-ti -- _______________________________________________ meta-ti mailing list meta-ti@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-ti