The iscsi-initiator-utils recipe has already been integrated into meta-networking layer. We have no reason to keep a duplicated one in meta-cloud-services layer. It also kill two QA warnings caused by this recipe.
Signed-off-by: Kevin Hao <[email protected]> --- .../iscsi-initiator-utils/files/initd.debian | 119 ---------- .../iscsi-initiator-utils-dont-use-static.patch | 20 -- .../iscsi-initiator-utils-use-var-for-config.patch | 239 --------------------- .../iscsi-initiator-utils.inc | 109 ---------- .../iscsi-initiator-utils_2.0-873.bb | 14 -- 5 files changed, 501 deletions(-) delete mode 100644 meta-openstack/recipes-extended/iscsi-initiator-utils/files/initd.debian delete mode 100644 meta-openstack/recipes-extended/iscsi-initiator-utils/files/iscsi-initiator-utils-dont-use-static.patch delete mode 100644 meta-openstack/recipes-extended/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch delete mode 100644 meta-openstack/recipes-extended/iscsi-initiator-utils/iscsi-initiator-utils.inc delete mode 100644 meta-openstack/recipes-extended/iscsi-initiator-utils/iscsi-initiator-utils_2.0-873.bb diff --git a/meta-openstack/recipes-extended/iscsi-initiator-utils/files/initd.debian b/meta-openstack/recipes-extended/iscsi-initiator-utils/files/initd.debian deleted file mode 100644 index eb8eea714528..000000000000 --- a/meta-openstack/recipes-extended/iscsi-initiator-utils/files/initd.debian +++ /dev/null @@ -1,119 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: -# Required-Stop: -# Default-Start: -# Default-Stop: -# Short-Description: Starts and stops the iSCSI initiator services and logins to default targets -### END INIT INFO -#set -x -PATH=/sbin:/bin:/usr/sbin:/usr/bin -DAEMON=/sbin/iscsid -ADM=/sbin/iscsiadm -PIDFILE=/var/run/iscsid.pid - -[ -x "$DAEMON" ] || exit 0 - -if [ ! -d /sys/class/ ]; then - echo "Failure:" "iSCSI requires a mounted sysfs, not started." - exit 1 -fi - -nodestartup_re='s/^node\.conn\[0]\.startup[ ]*=[ ]*//p' - -RETVAL=0 - -start() { - echo "Starting iSCSI initiator service" "iscsid" - modprobe -q iscsi_tcp 2>/dev/null || : - modprobe -q ib_iser 2>/dev/null || : - if [ ! -f /etc/iscsi/initiatorname.iscsi ]; then - INITIATORNAME=$(iscsi-iname) - cat >/etc/iscsi/initiatorname.iscsi <<EOF -## DO NOT EDIT OR REMOVE THIS FILE! -## If you remove this file, the iSCSI daemon will not start. -## If you change the InitiatorName, existing access control lists -## may reject this initiator. The InitiatorName must be unique -## for each iSCSI initiator. Do NOT duplicate iSCSI InitiatorNames. -InitiatorName=$INITIATORNAME -EOF - fi - start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON - RETVAL=$? - starttargets -} - -starttargets() { - echo "Setting up iSCSI targets" - $ADM -m node --loginall=automatic -} - -stoptargets() { - echo "Disconnecting iSCSI targets" - sync - $ADM -m node --logoutall=all - RETVAL=$? - #if RETVAL is 21, means no active sessions, consider ok - if [ "$RETVAL" = "21" ]; then - RETVAL=0 - fi -} - -stop() { - stoptargets - if [ $RETVAL -ne 0 ]; then - echo "Failure:" "Could not stop all targets, try again later" - return $RETVAL - fi - - echo "Stopping iSCSI initiator service" - start-stop-daemon --stop --quiet --pidfile $PIDFILE --exec $DAEMON - rm -f $PIDFILE - status=0 - modprobe -r ib_iser 2>/dev/null - if [ "$?" -ne "0" -a "$?" -ne "1" ]; then - status=1 - fi - modprobe -r iscsi_tcp 2>/dev/null - if [ "$?" -ne "0" -a "$?" -ne "1" ]; then - status=1 - fi -} - -restart() { - stop - if [ $RETVAL -ne 0 ]; then - echo "Failure:" "Stopping iSCSI initiator service failed, not starting" - return $RETVAL - fi - start -} - -restarttargets() { - stoptargets - if [ $RETVAL -ne 0 ]; then - echo "Failure:" "Could not stop all targets, try again later" - return $RETVAL - fi - starttargets -} - -status() { - #XXX FIXME: what to do here? - #status iscsid - # list active sessions - echo Current active iSCSI sessions: - $ADM -m session -} - -case "$1" in - start|starttargets|stop|stoptargets|restart|restarttargets|status) - $1 - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac -exit $RETVAL diff --git a/meta-openstack/recipes-extended/iscsi-initiator-utils/files/iscsi-initiator-utils-dont-use-static.patch b/meta-openstack/recipes-extended/iscsi-initiator-utils/files/iscsi-initiator-utils-dont-use-static.patch deleted file mode 100644 index 8645587e2310..000000000000 --- a/meta-openstack/recipes-extended/iscsi-initiator-utils/files/iscsi-initiator-utils-dont-use-static.patch +++ /dev/null @@ -1,20 +0,0 @@ -iscsi-initiator-utils not to use static - -This patch is from fedora17. - -Signed-off-by: Yao Zhao <[email protected]> -Signed-off-by: Vu Tran <[email protected]> - -diff --git a/usr/Makefile b/usr/Makefile -index 673b7f1..fd14a10 100644 ---- a/usr/Makefile -+++ b/usr/Makefile -@@ -61,7 +61,7 @@ iscsiadm: $(ISCSI_LIB_SRCS) $(DISCOVERY_SRCS) iscsiadm.o session_mgmt.o - - iscsistart: $(ISCSI_LIB_SRCS) $(INITIATOR_SRCS) $(FW_BOOT_SRCS) \ - iscsistart.o statics.o -- $(CC) $(CFLAGS) -static $^ -o $@ -+ $(CC) $(CFLAGS) $^ -o $@ - clean: - rm -f *.o $(PROGRAMS) .depend $(LIBSYS) - diff --git a/meta-openstack/recipes-extended/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch b/meta-openstack/recipes-extended/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch deleted file mode 100644 index b0ce88960d4b..000000000000 --- a/meta-openstack/recipes-extended/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch +++ /dev/null @@ -1,239 +0,0 @@ -iscsi-initiator-utils to use var for config - -This patch is from fedora. - -Use /var/lib/iscsi/ instead of /etc/iscsi/ for holding -state files. - -Signed-off-by: Yao Zhao <[email protected]> -Signed-off-by: Vu Tran <[email protected]> - -diff --git a/README b/README -index 7364b2d..5e8bff8 100644 ---- a/README -+++ b/README -@@ -164,10 +164,10 @@ available on all Linux installations. - - The database contains two tables: - --- Discovery table (/etc/iscsi/send_targets); --- Node table (/etc/iscsi/nodes). -+- Discovery table (/var/lib/iscsi/send_targets); -+- Node table (/var/lib/iscsi/nodes). - --The regular place for iSCSI database files: /etc/iscsi/nodes -+The regular place for iSCSI database files: /var/lib/iscsi/nodes - - The iscsiadm utility is a command-line tool to manage (update, delete, - insert, query) the persistent database. -@@ -444,7 +444,7 @@ a scsi_host per HBA port). - To manage both types of initiator stacks, iscsiadm uses the interface (iface) - structure. For each HBA port or for software iscsi for each network - device (ethX) or NIC, that you wish to bind sessions to you must create --a iface config /etc/iscsi/ifaces. -+a iface config /var/lib/iscsi/ifaces. - - Prep: - -@@ -478,29 +478,29 @@ Running: - iface0 qla4xxx,00:c0:dd:08:63:e8,20.15.0.7,default,iqn.2005-06.com.redhat:madmax - iface1 qla4xxx,00:c0:dd:08:63:ea,20.15.0.9,default,iqn.2005-06.com.redhat:madmax - --Will report iface configurations that are setup in /etc/iscsi/ifaces. -+Will report iface configurations that are setup in /var/lib/iscsi/ifaces. - The format is: - - iface_name transport_name,hwaddress,ipaddress,net_ifacename,initiatorname - - For software iscsi, you can create the iface configs by hand, but it is - reccomended that you use iscsiadm's iface mode. There is a iface.example in --/etc/iscsi/ifaces which can be used as a template for the daring. -+/var/lib/iscsi/ifaces which can be used as a template for the daring. - - For each network object you wish to bind a session to you must create --a seperate iface config in /etc/iscsi/ifaces and each iface config file -+a seperate iface config in /var/lib/iscsi/ifaces and each iface config file - must have a unique name which is less than or equal to 64 characters. - - Example: - - If you have NIC1 with MAC address 00:0F:1F:92:6B:BF and NIC2 with - MAC address 00:C0:DD:08:63:E7 and you wanted to do software iscsi over --TCP/IP. Then in /etc/iscsi/ifaces/iface0 you would enter: -+TCP/IP. Then in /var/lib/iscsi/ifaces/iface0 you would enter: - - iface.transport_name = tcp - iface.hwaddress = 00:0F:1F:92:6B:BF - --and in /etc/iscsi/ifaces/iface1 you would enter: -+and in /var/lib/iscsi/ifaces/iface1 you would enter: - - iface.transport_name = tcp - iface.hwaddress = 00:C0:DD:08:63:E7 -@@ -550,7 +550,7 @@ cxgb3i.00:07:43:05:97:07 cxgb3i,00:07:43:05:97:07,<empty>,<empty>,<empty> - qla4xxx.00:0e:1e:04:8b:2e qla4xxx,00:0e:1e:04:8b:2e,<empty>,<empty>,<empty> - - --Will report iface configurations that are setup in /etc/iscsi/ifaces. -+Will report iface configurations that are setup in /var/lib/iscsi/ifaces. - The format is: - - iface_name transport_name,hwaddress,ipaddress,net_ifacename,initiatorname -@@ -636,7 +636,7 @@ need a seperate network connection to the target for discovery purposes. - *This will be fixed in the next version of open-iscsi* - - For compatibility reasons, when you run iscsiadm to do discovery, it --will check for interfaces in /etc/iscsi/iscsi/ifaces that are using -+will check for interfaces in /var/lib/iscsi/iscsi/ifaces that are using - tcp for the iface.transport and it will bind the portals that are discovered - so that they will be logged in through those ifaces. This behavior can also - be overriden by passing in the interfaces you want to use. For the case -@@ -654,7 +654,7 @@ we do not bind a session to a iface, then you can use the special iface - - iscsiadm -m discoverydb -t st -p ip:port -I default --discover -P 1 - --And if you did not define any interfaces in /etc/iscsi/ifaces and do -+And if you did not define any interfaces in /var/lib/iscsi/ifaces and do - not pass anything into iscsiadm, running iscsiadm will do the default - behavior, where we allow the network subsystem to decide which - device to use. -@@ -696,7 +696,7 @@ To now log into targets it is the same as with sofware iscsi. See section - - ./iscsiadm -m discoverydb -t st -p 192.168.1.1:3260 --discover - -- This will search /etc/iscsi/send_targets for a record with the -+ This will search /var/lib/iscsi/send_targets for a record with the - ID [portal = 192.168.1.1:3260 and type = sendtargets. If found it - will perform discovery using the settings stored in the record. - If a record does not exist, it will be created using the iscsid.conf -@@ -705,7 +705,7 @@ To now log into targets it is the same as with sofware iscsi. See section - The argument to -p may also be a hostname instead of an address. - ./iscsiadm -m discoverydb -t st -p smoehost --discover - -- For the ifaces, iscsiadm will first search /etc/iscsi/ifaces for -+ For the ifaces, iscsiadm will first search /var/lib/iscsi/ifaces for - interfaces using software iscsi. If any are found then nodes found - during discovery will be setup so that they can logged in through - those interfaces. To specify a specific iface, pass the -@@ -761,7 +761,7 @@ To now log into targets it is the same as with sofware iscsi. See section - This command will perform discovery, but not manipulate the node DB. - - - SendTargets iSCSI Discovery with a specific interface. If you -- wish to only use a subset of the interfaces in /etc/iscsi/ifaces -+ wish to only use a subset of the interfaces in /var/lib/iscsi/ifaces - then you can pass them in during discovery: - - ./iscsiadm -m discoverydb -t sendtargets -p 192.168.1.1:3260 \ -@@ -1072,8 +1072,8 @@ where targetname is the name of the target and ip_address:port is the address - and port of the portal. tpgt, is the portal group tag of - the portal, and is not used in iscsiadm commands except for static - record creation. And iface name is the name of the iscsi interface --defined in /etc/iscsi/ifaces. If no interface was defined in --/etc/iscsi/ifaces or passed in, the default behavior is used. -+defined in /var/lib/iscsi/ifaces. If no interface was defined in -+/var/lib/iscsi/ifaces or passed in, the default behavior is used. - Default here is iscsi_tcp/tcp to be used over which ever NIC the - network layer decides is best. - -@@ -1188,7 +1188,7 @@ If set, iscsid will perform discovery to the address every - discovery.isns.discoveryd_poll_inval or - discovery.sendtargets.discoveryd_poll_inval seconds, - and it will log into any portals found from the discovery source using --the ifaces in /etc/iscsi/ifaces. -+the ifaces in /var/lib/iscsi/ifaces. - - Note that for iSNS the poll_interval does not have to be set. If not set, - iscsid will only perform rediscovery when it gets a SCN from the server. -diff --git a/doc/iscsiadm.8 b/doc/iscsiadm.8 -index 7c209f6..e94cca0 100644 ---- a/doc/iscsiadm.8 -+++ b/doc/iscsiadm.8 -@@ -89,7 +89,7 @@ This option is only valid for ping submode. - .TP - \fB\-I\fR, \fB\-\-interface=\fI[iface]\fR - The interface argument specifies the iSCSI interface to use for the operation. --iSCSI interfaces (iface) are defined in /etc/iscsi/ifaces. For hardware -+iSCSI interfaces (iface) are defined in /var/lib/iscsi/ifaces. For hardware - iSCSI (qla4xxx) the iface config must have the hardware address - (iface.hwaddress = port's MAC address) - and the driver/transport_name (iface.transport_name). The iface's name is -@@ -166,7 +166,7 @@ If no other options are specified: for \fIdiscoverydb\fR and \fInode\fR, all - of their respective records are displayed; for \fIsession\fR, all active - sessions and connections are displayed; for \fIfw\fR, all boot firmware - values are displayed; for \fIhost\fR, all iSCSI hosts are displayed; and --for \fIiface\fR, all ifaces setup in /etc/iscsi/ifaces are displayed. -+for \fIiface\fR, all ifaces setup in /var/lib/iscsi/ifaces are displayed. - - .TP - \fB\-n\fR, \fB\-\-name=\fIname\fR -@@ -535,10 +535,10 @@ The configuration file read by \fBiscsid\fR and \fBiscsiadm\fR on startup. - The file containing the iSCSI InitiatorName and InitiatorAlias read by - \fBiscsid\fR and \fBiscsiadm\fR on startup. - .TP --/etc/iscsi/nodes/ -+/var/lib/iscsi/nodes/ - This directory contains the nodes with their targets. - .TP --/etc/iscsi/send_targets -+/var/lib/iscsi/send_targets - This directory contains the portals. - - .SH "SEE ALSO" -diff --git a/usr/idbm.c b/usr/idbm.c -index 4d30aa9..316e54f 100644 ---- a/usr/idbm.c -+++ b/usr/idbm.c -@@ -2468,9 +2468,9 @@ free_info: - int idbm_init(idbm_get_config_file_fn *fn) - { - /* make sure root db dir is there */ -- if (access(ISCSI_CONFIG_ROOT, F_OK) != 0) { -- if (mkdir(ISCSI_CONFIG_ROOT, 0660) != 0) { -- log_error("Could not make %s %d\n", ISCSI_CONFIG_ROOT, -+ if (access(ISCSIVAR, F_OK) != 0) { -+ if (mkdir(ISCSIVAR, 0660) != 0) { -+ log_error("Could not make %s %d\n", ISCSIVAR, - errno); - return errno; - } -diff --git a/usr/idbm.h b/usr/idbm.h -index 245f046..f45e86e 100644 ---- a/usr/idbm.h -+++ b/usr/idbm.h -@@ -28,12 +28,16 @@ - #include "config.h" - #include "list.h" - --#define NODE_CONFIG_DIR ISCSI_CONFIG_ROOT"nodes" --#define SLP_CONFIG_DIR ISCSI_CONFIG_ROOT"slp" --#define ISNS_CONFIG_DIR ISCSI_CONFIG_ROOT"isns" --#define STATIC_CONFIG_DIR ISCSI_CONFIG_ROOT"static" --#define FW_CONFIG_DIR ISCSI_CONFIG_ROOT"fw" --#define ST_CONFIG_DIR ISCSI_CONFIG_ROOT"send_targets" -+#define ISCSIVAR "/var/lib/iscsi/" -+ -+#define NODE_CONFIG_DIR ISCSIVAR"nodes" -+#define SLP_CONFIG_DIR ISCSIVAR"slp" -+#define ISNS_CONFIG_DIR ISCSIVAR"isns" -+#define STATIC_CONFIG_DIR ISCSIVAR"static" -+#define FW_CONFIG_DIR ISCSIVAR"fw" -+#define ST_CONFIG_DIR ISCSIVAR"send_targets" -+ -+ - #define ST_CONFIG_NAME "st_config" - #define ISNS_CONFIG_NAME "isns_config" - -diff --git a/usr/iface.h b/usr/iface.h -index 01f7074..2c6ef72 100644 ---- a/usr/iface.h -+++ b/usr/iface.h -@@ -20,7 +20,8 @@ - #ifndef ISCSI_IFACE_H - #define ISCSI_IFACE_H - --#define IFACE_CONFIG_DIR ISCSI_CONFIG_ROOT"ifaces" -+#include "idbm.h" -+#define IFACE_CONFIG_DIR ISCSIVAR"ifaces" - - struct iface_rec; - struct list_head; diff --git a/meta-openstack/recipes-extended/iscsi-initiator-utils/iscsi-initiator-utils.inc b/meta-openstack/recipes-extended/iscsi-initiator-utils/iscsi-initiator-utils.inc deleted file mode 100644 index 30dcffc8efad..000000000000 --- a/meta-openstack/recipes-extended/iscsi-initiator-utils/iscsi-initiator-utils.inc +++ /dev/null @@ -1,109 +0,0 @@ -# -# Copyright (C) 2014 Wind River Systems, Inc. -# -SUMMARY = "iSCSI daemon and utility programs" -DESCRIPTION = \ -"Open-iSCSI project is a high performance, transport independent, \ -multi-platform implementation of RFC3720. The iscsi package provides \ -the server daemon for the iSCSI protocol, as well as the utility \ -programs used to manage it. iSCSI is a protocol for distributed \ -disk access using SCSI commands sent over Internet Protocol networks." -SECTION = "console/network" - -HOMEPAGE = "http://www.open-iscsi.org/"; -INC_PR = "r4" - -UPSTREAM_name = "open-iscsi" - -#iscsi-initiator-utils-{use-var-for-config}.patch are from fedora -#change nodes,send_targets... from /etc/iscsi to /var/lib/iscsi -SRC_URI = "http://www.open-iscsi.org/bits/${UPSTREAM_name}-${PV}.tar.gz \ - file://iscsi-initiator-utils-use-var-for-config.patch \ - file://iscsi-initiator-utils-dont-use-static.patch \ - file://initd.debian \ -" -S = "${WORKDIR}/${UPSTREAM_name}-${PV}" -TARGET_CC_ARCH += "${LDFLAGS}" - -#utils/fwparam_ibft/prom_parse.y utils/fwparam_ibft/prom_lex.l -#already parsed in source 2.0 but still depends on flex and bison -#native in case future version they are not parsed -DEPENDS += "openssl flex-native bison-native" - -PACKAGES =+ "${PN}-tests" - -FILES_${PN}-tests = "/opt/${BPN}-tests/*" -RDEPENDS_${PN}-tests = "perl" - -inherit update-rc.d - -do_configure () { - #need to support cross-compiling in open-isns only - (cd utils/open-isns; \ - ./configure --host=${TARGET_SYS} --build=${BUILD_SYS} --with-security=no ) -} - -do_compile () { - #make iscsistart one of PROGRAMS if install_user in do_install - #sed -i -e '/^PROGRAMS = /s;$; usr/iscsistart;' Makefile - - #fix the ar used in open-isns - sed -i -e 's:ar cr :$(AR) cr :' ${S}/utils/open-isns/Makefile - oe_runmake user - -} - -do_install () { - #completely override the install_user as bugs in Makefile - #oe_runmake DESTDIR="${D}" install_user - - #install necessary directories - install -d ${D}${base_sbindir} \ - ${D}${sysconfdir}/init.d \ - ${D}${sysconfdir}/iscsi \ - ${D}${localstatedir}/lib/iscsi/nodes \ - ${D}${localstatedir}/lib/iscsi/send_targets \ - ${D}${localstatedir}/lib/iscsi/static \ - ${D}${localstatedir}/lib/iscsi/isns \ - ${D}${localstatedir}/lib/iscsi/slp \ - ${D}${localstatedir}/lib/iscsi/ifaces \ - ${D}${localstatedir}/lock/iscsi ${D}/${mandir}/man8 - - install -p -m 755 ${S}/usr/iscsid ${S}/usr/iscsiadm \ - ${S}/utils/iscsi-iname \ - ${S}/usr/iscsistart ${D}/${base_sbindir} - - install -p -m 644 ${S}/doc/iscsiadm.8 ${S}/doc/iscsid.8 ${D}/${mandir}/man8 - install -p -m 644 ${S}/etc/iscsid.conf ${D}${sysconfdir}/iscsi - install -p -m 755 ${WORKDIR}/initd.debian ${D}${sysconfdir}/init.d/iscsid - - #install regression tests - [ ! -d ${D}/opt/${BPN}-tests ] && mkdir -p ${D}/opt/${BPN}-tests - install ${S}/test/regression.dat ${S}/test/regression.sh ${D}/opt/${BPN}-tests/ - - #open-isns tests - mkdir -p ${D}/opt/${BPN}-tests/isns-tests - install ${S}/utils/open-isns/tests/*.pl ${D}/opt/${BPN}-tests/isns-tests/ - install ${S}/utils/open-isns/tests/genkey \ - ${S}/utils/open-isns/tests/client.conf \ - ${S}/utils/open-isns/tests/server.conf \ - ${D}/opt/${BPN}-tests/isns-tests/ - cp -a ${S}/utils/open-isns/tests/data ${D}/opt/${BPN}-tests/isns-tests/ -} - -pkg_postinst_${PN}() { - #default there is no initiatorname.iscsi installed - #but it is needed or iscsid will fail - - #will run only when postinst on target - if [ "x$D" != "x" ]; then - exit 1 - fi - if [ ! -f ${sysconfdir}/iscsi/initiatorname.iscsi ]; then - echo "InitiatorName=$(${base_sbindir}/iscsi-iname)" > \ - ${sysconfdir}/iscsi/initiatorname.iscsi - fi -} - -INITSCRIPT_NAME = "iscsid" -INITSCRIPT_PARAMS = "start 30 1 2 3 4 5 . stop 70 0 1 2 3 4 5 6 ." diff --git a/meta-openstack/recipes-extended/iscsi-initiator-utils/iscsi-initiator-utils_2.0-873.bb b/meta-openstack/recipes-extended/iscsi-initiator-utils/iscsi-initiator-utils_2.0-873.bb deleted file mode 100644 index cb7429ddd264..000000000000 --- a/meta-openstack/recipes-extended/iscsi-initiator-utils/iscsi-initiator-utils_2.0-873.bb +++ /dev/null @@ -1,14 +0,0 @@ -# -# Copyright (C) 2014 Wind River Systems, Inc. -# -LICENSE = "GPLv2 & LGPLv2.1" -LIC_FILES_CHKSUM = \ - "file://COPYING;md5=393a5ca445f6965873eca0259a17f833 \ - file://utils/open-isns/COPYING;md5=7fbc338309ac38fefcd64b04bb903e34" - -PR = "${INC_PR}.0" - -SRC_URI[md5sum] = "8b8316d7c9469149a6cc6234478347f7" -SRC_URI[sha256sum] = "7dd9f2f97da417560349a8da44ea4fcfe98bfd5ef284240a2cc4ff8e88ac7cd9" - -require ${PN}.inc -- 2.8.1 -- _______________________________________________ meta-virtualization mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-virtualization
