Are you sure you are using zeus branch and not gatesgarth? I had the same problem but it was because gatesgarth branch requires and extra layer which is not needed in zeus branch.
On 18/1/21 14:11, [email protected] wrote: > I am completely new to Yocto and I would like to build a minimal image > for a ZCU104 board to have a solid ground before starting with more > complex projects. I followed these simple steps: > > 1. Cloned Yocto and checkout out the zeus branch. > 2. Cloned meta-xilinx under build/ and checked out the zeus branch > (LAYERSERIES_COMPAT = "zeus" > 3. Added meta-xilinx-bsp ,meta-xilinx-contrib and > meta-xilinx-standalone to conf/bblayers.conf with bitbake-layers > add-layer and I checked if they were added. > 4. In conf/local.conf I edited MACHINE to MACHINE ??= "zcu104-zynqmp" > 5. bitbake core-image-minimal > > No errors while parsing but then an error occurred after running around > 75% of the tasks: ERROR: Task > (.../poky/build/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2019.2.bb:do_compile) > failed with exit code '1'" > As I didn't know what to do to solve that problem, I gave it a second > try with the gatesgarth branches (Yocto and meta-xilinx) but that was > even worse because I got a parse error before running any task: ERROR: > ParseError at > .../poky/build/meta-xilinx/meta-xilinx-bsp/recipes-bsp/uboot-device-tree/uboot-device-tree.bb:11: > Could not inherit file classes/xsctdt.bbclass > > Am I missing any step before building the image? As I said, I only need > to build a simple image that just works. Thanks! > > > > -- Avís - Aviso - Legal Notice - (LOPD) - http://legal.ifae.es <http://legal.ifae.es/>
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#4798): https://lists.yoctoproject.org/g/meta-xilinx/message/4798 Mute This Topic: https://lists.yoctoproject.org/mt/79922149/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-xilinx/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
