> -----Original Message----- > From: meta-xilinx-boun...@yoctoproject.org [mailto:meta-xilinx- > boun...@yoctoproject.org] On Behalf Of Syed Syed > Sent: Thursday, December 07, 2017 9:39 PM > To: meta-xilinx@yoctoproject.org > Subject: [meta-xilinx] pmu-firmware build failure > > [This sender failed our fraud detection checks and may not be who they appear > to > be. Learn about spoofing at http://aka.ms/LearnAboutSpoofing] > > Hi > One of our customers using 2017.1 based yocto release is having issues > with pmu- > firmware not being built as part of bitbake core-image-minimal. > > I don't know how this error can get triggered, nor was I able to reproduce > this > behavior in any setting. > Any pointers? > > -syed > > DEBUG: Executing python function sstate_task_prefunc > DEBUG: Python function sstate_task_prefunc finished > DEBUG: Executing shell function do_deploy > install: cannot stat '/home/syeds/extra/TSN_2017.1/xilinx-TSN- > yocto/build/tmp/work/zcu102_zynqmp-xilinx-linux/pmu- > firmware/2017.1+gitAUTOINC+3813f14966-r0/build/pmu-firmware/Release/pmu- > firmware.elf': No such file or directory > WARNING: exit code 1 from a shell command. > ERROR: Function failed: do_deploy (log file is located at > /home/syeds/extra/TSN_2017.1/xilinx-TSN-yocto/build/tmp/work/zcu102_zynqmp- > xilinx-linux/pmu-firmware/2017.1+gitAUTOINC+3813f14966- > r0/temp/log.do_deploy.22510)
Check log.do_configure or log.do_compile to see if there were failures. Thanks, Manju -- _______________________________________________ meta-xilinx mailing list meta-xilinx@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-xilinx
