From: Devarsh Thakkar <devarsh.thak...@xilinx.com>
The ZCU106 Evaluation Kit enables designers to jumpstart designs for
video conferencing, surveillance, Advanced Driver Assisted Systems
(ADAS) and streaming and encoding applications. This kit features a
Zynq® UltraScale+™ MPSoC EV device and supports all major peripherals
and interfaces, enabling development for a wide range of applications.
The included ZU7EV device is equipped with a quad-core ARM® Cortex™-A53
applications processor, dual-core Cortex-R5 real-time processor,
Mali™-400 MP2 graphics processing unit, 4KP60 capable H.264/H.265 video
codec, and 16nm FinFET+ programmable logic.
This patch adds machine configuration file for ZCU106 Evaluation Kit
with required setting of board specific yocto variables needed for
compilation of bootloader, kernel and device-tree.
- linux-xlnx is the kernel provider
- u-boot-xlnx is the u-boot provider which will also generate SPL boot.bin
- hwcodec is provided by libomxil-xlnx recipe, this will pull in
additional dependencies of VCU kernel modules, control software,
firmware binaries
Depending on the application need you may want to pass the appropriate
CMA size in bootargs or set CONFIG_CMA_SIZE_MBYTES in kernel.
While using SPL flow, you may need to provide additional hack to pass
the PMU config object. This is similar to all ZU+ boards, due to gap in
SPL flow unable to load PMU config object.
Signed-off-by: Devarsh Thakkar <devar...@xilinx.com>
Tested-by: Maulik Desai <maulik.de...@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-ma...@xilinx.com>
---
Changelog:
v2: Add commit message to describe the providers and state of SPL boot.
Also add the requirement of CMA size required based on appliction
meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf | 33 ++++++++++++++++++++++
.../recipes-bsp/u-boot/u-boot-xlnx_2018.1.bb | 1 +
2 files changed, 34 insertions(+)
create mode 100644 meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf
diff --git a/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf
b/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf
new file mode 100644
index 0000000..42ac479
--- /dev/null
+++ b/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf
@@ -0,0 +1,33 @@
+#@TYPE: Machine
+#@NAME: zcu106-zynqmp
+#@DESCRIPTION: Machine support for ZCU106 Evaluation Board.
+
+require conf/machine/include/tune-zynqmp.inc
+require conf/machine/include/machine-xilinx-default.inc
+require conf/machine/include/machine-xilinx-board.inc
+include conf/machine/include/zynqmp-pmu-config.inc
+
+MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost"
+
+UBOOT_MACHINE = "xilinx_zynqmp_zcu106_revA_defconfig"
+SPL_BINARY = "spl/boot.bin"
+
+SERIAL_CONSOLE = "115200 ttyPS0"
+SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
+
+KERNEL_DEVICETREE = "xilinx/zynqmp-zcu106-revA.dtb"
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx"
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx"
+PREFERRED_PROVIDER_virtual/pmu-firmware ?= "zynqmp-pmu-pmu-firmware"
+
+EXTRA_IMAGEDEPENDS += " \
+ u-boot-zynq-uenv \
+ arm-trusted-firmware \
+ virtual/pmu-firmware \
+ virtual/boot-bin \
+ "
+
+IMAGE_BOOT_FILES += "uEnv.txt atf-uboot.ub
${KERNEL_IMAGETYPE}-zynqmp-zcu106-revA.dtb"
+
+MACHINE_HWCODECS = "libomxil-xlnx"
diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.1.bb
b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.1.bb
index e503f82..d5e746e 100644
--- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.1.bb
+++ b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.1.bb
@@ -21,5 +21,6 @@ HAS_PLATFORM_INIT ?= " \
zynq_zc706_config \
zynq_zybo_config \
xilinx_zynqmp_zcu102_rev1_0_config \
+ xilinx_zynqmp_zcu106_revA_config \
"
--
2.7.4
--
_______________________________________________
meta-xilinx mailing list
meta-xilinx@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-xilinx
