Hi, both ways are working. For upstreaming I have cleanup that files a little bit to contain only parts which are necessary.
Thanks, Michal > > Thanks again for responding Luca. > > > Relating to zcu102, it turns out related to the integration of init files - I > was originally overwriting the 'new' header file > 'arch/arm/include/asm/arch-zynqmp/psu_init_gpl.h'. However, simply adding the > Vivado exported header file to > 'board/xilinx/zynqmp/zynqmp-zcu102-rev1.0/psu_init_gpl.h' and overwriting the > associated existing 'psu_init_gpl.c' yields the SPL generation to succeed. > > > Thanks, > > Martin > > ________________________________ > From: Luca Ceresoli <l...@lucaceresoli.net> > Sent: Thursday, June 14, 2018 11:16:21 PM > To: Martin Siegumfeldt; meta-xilinx@yoctoproject.org > Cc: Michal Simek > Subject: Re: [meta-xilinx] Generation of psu_init files > > Hi Martin, > > On 14/06/2018 21:40, Martin Siegumfeldt wrote: >> Thanks Luca, >> >> >> Michal, Manju I appreciate if you could provide some insight into the >> plan forward here. On the zcu102 board we are seeing a much improved >> QSPI NOR / UBI stack from what is planned to go into the Sumo release. >> Unfortunately we can not integrate the init code for our custom board as >> exported by any current Vivado version. Is this new structure exported >> by an upcoming Vivado release, or how do you expect us to handle this? > > Strange. I just tried to build the xilinx_zynqmp_zcu106_revA_defconfig > config on a mainline U-Boot (v2018.07-rc1-132-g606fddd76c7a), using the > psu_init_gpl files from [0] and they built fine. I tried both the latest > files (2018.2) and the 2017.1 version. > > I tried also on current u-boot-xlnx master, it works too. > > This is expected since the "new format" is nothing but the "old format", > which I would rather call the "format produced by Vivado", stripped down > of unneeded things such as comments, unused function definitions etc. > > Can you give some more detail on what you are doing and what happens? > What error message do you obtain? Which version of U-Boot? Can you > provide your psu_ini_gpl.* files? Your defconfig? > > [0] https://github.com/Xilinx/hdf-examples > > Regards, > -- > Luca > > -- _______________________________________________ meta-xilinx mailing list meta-xilinx@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-xilinx