Hi Mike, On 04/06/19 07:41, Mike Looijmans wrote: > On 03-06-19 16:25, Manjukumar Harthikote Matha wrote: >> Hi Mike, >> >>> -----Original Message----- >>> From: meta-xilinx-boun...@yoctoproject.org <meta-xilinx- >>> boun...@yoctoproject.org> On Behalf Of Mike Looijmans >>> Sent: Monday, June 3, 2019 7:01 AM >>> To: meta-xilinx@yoctoproject.org >>> Subject: [meta-xilinx] Build and boot zcu106 image >>> >>> Got a zcu106 board here to experiment with. With pre-built stuff, the >>> board >>> boots okay. >>> >>> I cloned OpenEmbedded and meta-xilinx "thud" branches, made no changes. >>> >>> Built the PMU firmware and core-image-minimal for machine zcu106-zynqmp. >>> >> >> I had similar issue! I think the PMU default config objects in SPL >> flow does not work. >> Luca had config object which worked for him. > > > And what is the solution? > > > There's nothing "machine" dependent in the PMU recipe, so all ZynqMP > machines will build the exact same binary. Right? > > My first attempt was actually to use my "standard" PMU stuff (patched > PMU with built-in config object) for the image, but that also delivered > the same error.
My SPL patch is just moving the cfg loading in a different place. It would not solve your problem. Just guessing, are you using the pm_cfg_obj.c produced by XDSK for your FPGA design or an "enable-all" config? > > >> >> Thanks, >> Manju >>> Copied the usual files onto an SD card: atf-uboot.ub boot.bin Image >>> system.dtb >>> u-boot.bin uEnv.txt zynqmp-zcu106-revA.dtb >>> >>> Put the card in the board and switch it on. All I get is this: >>> >>> <debug_uart> Debug uart enabled >>> "Synchronous Abort" handler, esr 0x96000040 >>> ELR: fffc9e70 >>> LR: fffc6c78 >>> x0 : fdfd00011dfdfe5d x1 : 0000000000000000 >>> x2 : 0202ffff020201a3 x3 : fdfd00011dfdfe5d >>> x4 : 0000000000000000 x5 : 0000000000000000 >>> x6 : 00000000ffff7f20 x7 : 0000000000000005 >>> x8 : 00000000000000ad x9 : 0000000000000080 >>> x10: 000000000000fffd x11: 0000000000000064 >>> x12: 00000000fffffe6a x13: 60f8a90300b080a0 >>> x14: 8a10070a42650000 x15: a5cc22ca484081d9 >>> x16: 385a360321460003 x17: 9b800c890e560844 >>> x18: 00000000ffff7e90 x19: 0000000020000000 >>> x20: 0000000000000000 x21: fdfd00011dfdfe5d >>> x22: 0000000000000000 x23: 0000000000000001 >>> x24: 00000000ffff7f20 x25: 00000000fffdae68 >>> x26: 00000000fffdae68 x27: 00000000fffdb000 >>> x28: 0000000000000000 x29: 00000000ffff7c10 >>> >>> Resetting CPU ... >>> >>> ### ERROR ### Please RESET the board ### >>> >>> >>> What does one have to do to actually boot that board with meta-xilinx? >>> -- >>> _______________________________________________ >>> meta-xilinx mailing list >>> meta-xilinx@yoctoproject.org >>> https://lists.yoctoproject.org/listinfo/meta-xilinx > -- Luca -- _______________________________________________ meta-xilinx mailing list meta-xilinx@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-xilinx