Oops..that should read:
Further, any oil can contaminate the stone, making it hard to stick to a
slide.
Further, one should be really careful on the type of polishing compound
used.
My bottom line is stay away from contaminants....oil
Jim
Hi Erik!
In my opinion it is NOT a good idea to use anything except de-ionized
distilled water when cutting.
Further, any oil can contaminate the stone, making it had to stick to a
slide.
Talk to Laurence....he can show you what they use.
Jim
----- Original Message -----
From: "Erik Fisler" <phxe...@yahoo.com>
To: <meteorite-list@meteoritecentral.com>
Sent: Thursday, February 09, 2012 1:31 PM
Subject: [meteorite-list] Cutting with water soluble oils?
Is it okay to cut chondrites with water soluble oil in an oil saw or will
that screw with the classification?
[Erik]
Sent from my iPod
______________________________________________
Visit the Archives at
http://www.meteoritecentral.com/mailing-list-archives.html
Meteorite-list mailing list
Meteorite-list@meteoritecentral.com
http://six.pairlist.net/mailman/listinfo/meteorite-list
______________________________________________
Visit the Archives at
http://www.meteoritecentral.com/mailing-list-archives.html
Meteorite-list mailing list
Meteorite-list@meteoritecentral.com
http://six.pairlist.net/mailman/listinfo/meteorite-list
______________________________________________
Visit the Archives at http://www.meteoritecentral.com/mailing-list-archives.html
Meteorite-list mailing list
Meteorite-list@meteoritecentral.com
http://six.pairlist.net/mailman/listinfo/meteorite-list
