Hello Behcet,
The Alternate Home Agent Tunnel Address is what
the mobile node would use as the _home agent's_
IP address for the tunnel, when the mobile node is
exchanging data to/from a correspondent node
through the home agent. For control signaling
(Binding Update, etc.) the mobile node still
would use the "regular" home agent address.
Regards,
Charlie P.
On 8/11/2011 9:25 AM, Behcet Sarikaya wrote:
Hi Charlie,
I took a look at this draft.
Regarding control plane data plane separation, what is the difference between
Alternate Home Agent Tunnel Address
that you defined and
Alternate Care-of Address
defined in RFC 6275?
I remember there was some discussion in the past by Vijay, et al. for a similar
use? Maybe you remember the details and you can shed some light into this?
Regards,
Behcet
Hello folks,
I have revised and resubmitted my earlier draft proposing
a split between the control and data plane addresses of
the home agent. For some reason, the Internet Draft
submission process seems to have hung when I made the
formal submission, and I don't know when I will get the
verification email. In the meantime, here is a URL:
http://www.psg.com/~charliep/txt/ietf81/draft-perkins-mext-hatunaddr-01.txt
I also added text for the same idea with Mobile IPv4.
Regards,
Charlie P.
_______________________________________________
MEXT mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/mext
_______________________________________________
MEXT mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/mext
