Pete,
The only problem I have ever had with macros is when I was trying to
group geometry that was not in view. I was able to get around this by
putting a view full statement in my macro. Are you sure that nothing can be
done with the macro to solve your problem?
Greg King
Group Leader
Manufacturing Services
Rittal Corporation
937-399-0500 Ext. 3371
[EMAIL PROTECTED]
> -----Original Message-----
> From: Pete Ruehle [SMTP:[EMAIL PROTECTED]]
> Sent: Friday, March 03, 2000 12:33 PM
> To: 'Daryl Hatch'; Pete Ruehle; 'SmartCam Forum'
> Subject: RE: [mfg-smartcam] insert prorerty bar; automating
>
> Daryl:
>
> Yes, I am aware that it can not be done in the conventional manner using
> macro record. And yes, I am looking for a "back door" or possibly
> someone,
> maybe a reseller, who might be able to open the code. I realize there may
> be a fee involved but I'm at the point where I need to resolve this
> problem.
> Many of my macros crash if I forget to turn off the bar first. Maybe this
> is not the place to be discussing this anyway.
>
> Thanks
> Pete
>
> > -----Original Message-----
> > From: Daryl Hatch [SMTP:[EMAIL PROTECTED]]
> > Sent: Friday, March 03, 2000 11:48 AM
> > To: Pete Ruehle; 'SmartCam Forum'
> > Subject: Re: [mfg-smartcam] insert prorerty bar; automating
> >
> > No, it's not possible.
> >
> > Here's a way to test to see if something like this is possible:
> > 1. Turn the macro record on (Macro-Record...) and pick a macro file
> > name
> > like 'Trash.mcl'.
> > 2. Then perform the function in question.
> > 3. Turn off the macro recording (Macro-Stop)
> > 4. Take a look at the macro file and see what commands SmartCAM
> used.
> >
> > When I did this to try the insert property bar on/off, there was only
> the
> > header information in the file.
> >
> > Pete, I have a feeling you already know this and your just looking for
> > some
> > sort of undocumented back door, but I see this kind of question pop up
> > periodically and thought I would throw this out on the table.
> >
> > Daryl
> >
> >
> >
> > ----- Original Message -----
> > From: Pete Ruehle <[EMAIL PROTECTED]>
> > To: 'SmartCam Forum' <[EMAIL PROTECTED]>
> > Sent: Friday, March 03, 2000 7:53 AM
> > Subject: [mfg-smartcam] insert prorerty bar; automating
> >
> >
> > > Hey gang:
> > >
> > > I know this is probably a long shot, but...
> > > Does anyone know if it is possible to automate Smartcam to control the
> > > display of the insert property bar?
> > > I need to turn it off at the start of macros and then turn it back on
> at
> > the
> > > end.
> > >
> > > Pete
> > >
> > >
> > > _______________________________________________________
> > > Peter Ruehle
> > > Semiconductor Packaging Materials
> > > [EMAIL PROTECTED]
> > > http://www.sempck.com
> > > (914) 273-5500
> > >
> > > ======================================================================
> > > To find out more about this mailing list including how to unsubscribe,
> > > send the message "info mfg-smartcam" to [EMAIL PROTECTED]
> > > ======================================================================
> ======================================================================
> To find out more about this mailing list including how to unsubscribe,
> send the message "info mfg-smartcam" to [EMAIL PROTECTED]
> ======================================================================
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
