[mfg-smartcam] Drill Cycle

[Gary]

I have some trouble with my milling post. Everything is working fine except when we use multiple workplanes and want to tap holes. Our machine requires a us to cancel the tapping cycle when switching to a new workplane ( H offset ). Drilling cycles do not require this. I do not want to cancel all cycles when switching to a new workplane in order to keep the file as small as possible.  To cancel a tapping cycle we need to output  "  G80 J0.00 " before switching to a new workplane.   File as posted.   : T7 N0730 (MSG, T7 6.000 DIA. TAP M6) N0740 (MSG, TAPPING) N0750 M06 N0760 T5 N0770 G71 N0780 H1 G00 X518.0 Y-7.94 Z23.0 N0790 S212 M13 N0800 G60 G84 G95 X518.0 Y-7.94 Z-19.0 R0.0 W23.0  J1 F1.0 N0810 H2 G00 X518.0 Y-23.82 Z23.0 N0820 G60 G84 G95 X518.0 Y-23.82 Z-19.0 R0.0 W23.0 J1 F1.0 N0830 X368.0 Y-23.82 W23.0 N0840 H1 G00 X368.0 Y-7.94 Z23.0 N0850 G60 G84 G95 X368.0 Y-7.94 Z-19.0 R0.0 W23.0  J1 F1.0 N0860 X218.0 Y-7.94 W23.0 N0870 H2 G00 X218.0 Y-23.82 Z23.0 N0880 G60 G84 G95 X218.0 Y-23.82 Z-19.0 R0.0 W23.0 J1 F1.0 N0890 X68.0 Y-23.82 W23.0 N0900 H1 G00 X68.0 Y-7.94 Z23.0 N0910 G60 G84 G95 X68.0 Y-7.94 Z-19.0 R0.0 W23.0  F1.0 N0920 G80 J0.000 N0930 G00 Z23.0   File as modified.     : T7 N0730 (MSG, T7 6.000 DIA. TAP M6) N0740 (MSG, TAPPING) N0750 M06 N0760 T5 N0770 G71 N0780 H1 G00 X518.0 Y-7.94 Z23.0 N0790 S212 M13 N0800 G60 G84 G95 X518.0 Y-7.94 Z-19.0 R0.0 W23.0  J1 F1.0 N0805 G80 J0.000 N0810 H2 G00 X518.0 Y-23.82 Z23.0 N0820 G60 G84 G95 X518.0 Y-23.82 Z-19.0 R0.0 W23.0 J1 F1.0 N0830 X368.0 Y-23.82 W23.0 N0835 G80 J0.000 N0840 H1 G00 X368.0 Y-7.94 Z23.0 N0850 G60 G84 G95 X368.0 Y-7.94 Z-19.0 R0.0 W23.0  J1 F1.0 N0860 X218.0 Y-7.94 W23.0 N0865 G80 J0.000 N0870 H2 G00 X218.0 Y-23.82 Z23.0 N0880 G60 G84 G95 X218.0 Y-23.82 Z-19.0 R0.0 W23.0 J1 F1.0 N0890 X68.0 Y-23.82 W23.0 N0895 G80 J0.000 N0900 H1 G00 X68.0 Y-7.94 Z23.0 N0910 G60 G84 G95 X68.0 Y-7.94 Z-19.0 R0.0 W23.0  F1.0 N0920 G80 J0.000 N0930 G00 Z23.0   Any help is appreciated.   Regards, Gary Marxrieser