Just a reminder. The @CYCLCHG section, if present, is processed before processing every other @section. If you need to do some preliminary processing for all @sections, that is a convenient place to put it.
--g Dave Coupar wrote: > Xtanker85, > > If you're feed is being output in IPM, then very possibly it will. > > I'm assuming that you're programming a mill. If that's so (no CSS to contend > with), then you could find the ratio of the Planner speed to 6000 and use > this ratio to multiply the planner feed rate by. Or, in the planner, enter > your desired SFM, and if you see the RPM is calculated more than 6000, enter > 6000 in the RPM field. > > @DECLARE > #DEC #Ratio > > @START > #EVAL(#Ratio=6000/#SPEED) > #IF(#Ratio<1)<#EVAL(#FEED=#FEED*#Ratio)> > > Anyway, something like that might work, but you might have to do a lot of > dinkin' around in various template sections. That's why my second suggestion > makes more sense (to me, anyway). > > LOL > > Dave > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] > Sent: Thursday, July 27, 2000 8:46 PM > To: [EMAIL PROTECTED] > Subject: [mfg-smartcam] max spindle speed > > Hey, thanks for everybody's help. That line > #IF(#SPEED>6000)<#EVAL(#SPEED=6000)> > works. It got me thinking about the feed rate. If we constrain the RPM at > the > post, will the feed rate, which is controlled earlier by the program, be too > much? > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== > > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== -- Gregg Olson Development Manager SDRC CAM Products ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
