Hi Randy, I have had the same problem. I tink that my installation of SC by time has become corrupt some way, ther are several problems like this comming up time by time.
The only way around the chamfer problem I has found is triming the line ends to an other lenght and then try ons more. By the way, I am running on an "old" pc SC FFM ver. 11.1 T.Holst. At 08:34 20.03.2001 -0800, you wrote: >Hi all, > >I have just moved Pturn to a new PIII NT4.0 SP6 machine. I am now having >problems with the chamfer function. I can create a chamfer on an inside >corner but not on an outside corner. It bombs with error "2665: Element too >small or perpindicular to active plane" and neither of which are true. All >elements are on the zx plane and my chamfer is 45 deg x .03" which will >easily fit my geometry. > >Any ideas? > >Thanks, >Randy > >===================================== >Randy Rochester >CNC Coordinator - Tool & Die Dept. >Walker Die Casting, Inc. >P.O. Box 1189 >1125 Higgs Road >Lewisburg, TN 37091 >931.359.6206 ph >931.359.9703 fax >==================================== > >====================================================================== >To find out more about this mailing list including how to unsubscribe, >send the message "info mfg-smartcam" to [EMAIL PROTECTED] >====================================================================== > ------------------------------------------------------------------- Thorbjoern Holst, CAM Coordinator Prototech AS, PostBoks 12, Fantoftveien 38, 5036 FANTOFT, NORWAY E-Mail : mailto:[EMAIL PROTECTED] Telefon : + 47 55574039 Sentralbord : + 47 55574110 Fax : + 47 55574114 -------------------------------------------------------------------- ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
