You guys can stop now! I have MORE then enough to go on for selecting partial arcs on a profile.
Thanks. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, March 01, 2001 8:07 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: [mfg-smartcam] Selecting arc(s) by a certain radius size Importance: High Mike, Here's another macro I use alot which may contain logic that will help you. This macro will select arcs of a radius that you specify OUT of an existing group, and leave only the arcs you specified in the group. Again, if you change FA=1 to FA=2 it will select only partial arcs. It doesn't matter what is in the original group; steps, lines, polylines, etc. The original group can contain ANYTHING (even a Mastercam cod generator) : ) Chris Kocourek CNC Department Manager Flextronics Enclosures, Inc. (See attached file: SEL_ARC.mcl) ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
