Pete, In my case, it works both ways, I have Fanuc 10T's and 6T's. It is easier to renumber the code if they are where example #2 puts them. Rick
-----Original Message----- From: Pete Ruehle [mailto:[EMAIL PROTECTED]] Sent: Friday, February 16, 2001 5:54 AM To: 'Jeff Pieper'; SmartCAM List Server Subject: RE: [mfg-smartcam] Block Delete Correct me if I'm wrong, but isn't the format in the first example the correct one? > -----Original Message----- > From: Jeff Pieper [SMTP:[EMAIL PROTECTED]] > Sent: Thursday, February 15, 2001 10:41 PM > To: SmartCAM List Server > Subject: [mfg-smartcam] Block Delete > > Hey Group, > When I code a job on SmartCAM with Block Delete's in the program > it out puts like this. > > N35 M106 (1" X 90' SPOT DRILL TOOL 1) > N40 T02M08 > N45 G00X-3.006Y1.78S2500M03 > N50 G43Z0.0H01 > N55 G98G81Z-1.24R-0.9F35.0 > /N60 X-2.294Y2.47 > /N65 X-0.9Y1.95 > /N70 X-1.5Y2.0 > > How can I get the Block Delete's to code like this? > > N35 M106 (1" X 90' SPOT DRILL TOOL 1) > N40 T02M08 > N45 G00X-3.006Y1.78S2500M03 > N50 G43Z0.0H01 > N55 G98G81Z-1.24R-0.9F35.0 > N60 / X-2.294Y2.47 > N65 / X-0.9Y1.95 > N70 / X-1.5Y2.0 ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================Title: RE: [mfg-smartcam] Block Delete
Pete,
In my case, it works both ways, I have Fanuc 10T's and 6T's. It is easier to renumber the code if they are where example #2 puts them.
Rick
-----Original Message-----
From: Pete Ruehle [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 16, 2001 5:54 AM
To: 'Jeff Pieper'; SmartCAM List Server
Subject: RE: [mfg-smartcam] Block Delete
Correct me if I'm wrong, but isn't the format in the first example the
correct one?
> -----Original Message-----
> From: Jeff Pieper [SMTP:[EMAIL PROTECTED]]
> Sent: Thursday, February 15, 2001 10:41 PM
> To: SmartCAM List Server
> Subject: [mfg-smartcam] Block Delete
>
> Hey Group,
> When I code a job on SmartCAM with Block Delete's in the program
> it out puts like this.
>
> N35 M106 (1" X 90' SPOT DRILL TOOL 1)
> N40 T02M08
> N45 G00X-3.006Y1.78S2500M03
> N50 G43Z0.0H01
> N55 G98G81Z-1.24R-0.9F35.0
> /N60 X-2.294Y2.47
> /N65 X-0.9Y1.95
> /N70 X-1.5Y2.0
>
> How can I get the Block Delete's to code like this?
>
> N35 M106 (1" X 90' SPOT DRILL TOOL 1)
> N40 T02M08
> N45 G00X-3.006Y1.78S2500M03
> N50 G43Z0.0H01
> N55 G98G81Z-1.24R-0.9F35.0
> N60 / X-2.294Y2.47
> N65 / X-0.9Y1.95
> N70 / X-1.5Y2.0
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
