|
looks like your tmp file needs some work. check my tmp. file
and make sure you have the clr. turned off.
#ONBLK G0 G97 G99 G40 G80 #CENG
T#TOOL M16 (
#TDESC)
#IF(#SPMODE=G97)<< #SPMODE S#SPEED #SPNDL>>
#ELSE<
G50 S3500 #PRMRY
#SPMODE S#SPEED #SPNDL>
<
#PRMRY>
#NEXTPT
#MOV X#XPOS Z#ZPOS T#TOFF
M8
@STEPCHG
#IF(#SPMODE=G97)<< #SPMODE S#SPEED
#SPNDL>>
#ELSE< G50 S3500
#SPMODE S#SPEED
#SPNDL>
#NEXTPT
#MOV X#XPOS
Z#ZPOS
@TOOLCHG
#IF(#U19=1)<#EVAL(#C0=0)>#ELSE<#EVAL#U18=1)>
#MOV<
X#XPOS>< Z#ZPOS> T0 M9
(TIME BY TOOL - #FMT(#TLTIME,D3.2) MIN
)
M1
(OPTION STOP)
//#OFFBLK
#SAFBLK
G0 G97 G99 G40 G80<
#CENG>
T#TOOL M16 ( #TDESC)
#IF(#SPMODE=G97)<<
#SPMODE S#SPEED #SPNDL>>
#ELSE< G50 S3500<
#PRMRY>
#SPMODE S#SPEED #SPNDL>
<
#PRMRY>
#NEXTPT
#MOV X#XPOS Z#ZPOS T#TOFF
M8
#EVAL(#V7=#TLDIA/2)
@END
#MOV< X#XHOME>< Z#ZHOME>
T0 M9
(TIME BY TOOL - #FMT(#TLTIME,D3.2) MIN )
(CYCLE TIME
- #FMT(#CYTIME,D3.2) MIN )
M30
#OFFBLK%
Dave Wolfgang
----- Original Message -----
Sent: Tuesday, April 03, 2001 4:07
PM
Subject: [mfg-smartcam] extra lines in
Aturn v11.5
Hi All,
I have had this problem in Aturn for a long
time now, and I have been just
editing my program afterwards. I am
trying to avoid that now that it seems
that I have some time on my
hands. I am working with Aturn v11.5 and my
turning looks like
this:
( TURN SHANK )
( CCMT-3251 KC 935 )
( T0500
)
N9G50S4000
N10M96
N11G96S225T0500M03
N12G00X0.0688Z-0.0344T0505
N13G00X0.2534Z-0.1057
N14G00X0.0802Z-0.0557
N15G01X0.2958Z0.131F0.003
N16G00X0.2688Z0.0156
N17G00X0.3Z-0.1
N18G00Z0.0
N19G01X-0.0312
This
doesn't make my machine crash or anything like that, it just don't
look
good to see it move in strange ways.
I should tell you that I am
not using cutter comp on the machine, so we
program the tool edge. I
would like the program to look more
like:
N9G50S4000
N10M96
N11G96S225T0500M03
N12G00X0.3Z0T0505
N13G01X-0.312F0.003
etc..etc..
If anybody can provide any help, I would be very
appreciative.
Thank you,
Rick Stannard
SR. CNC
Programmer
Fairchild Fasteners, South Bay
3000 W. Lomita
Blvd
Torrance, CA. 90505
Ph. (310)784-4394
cell
(310)938-8431
[EMAIL PROTECTED]
www.fairchildfasteners.com
|
