Bill; Check SMF question 303. Should probably be set to <1> Output code from world XY plane coordinate system, and/or make sure your geometry is created on the XY plane and your tool plane matches the work plane. Sincerely, Chuck Glawe Courtesy Corporation Mold & Tool Div. mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> http://www.courtesycorp.com <http://www.courtesycorp.com/>
-----Original Message----- From: Bill Payter [mailto:[EMAIL PROTECTED]] Sent: Saturday, June 30, 2001 11:35 AM To: SmartCAM Users Subject: [mfg-smartcam] Wrapping in the UK Hi Steve / Lee / everyone else, Lee, I pretty much did as you say, Z0 as centre of rotation, Z6 as cutting level, Z6.1 profile top, Z8.0 clearance, but Z0 comes out as the cutting level in the code? Is it something in the code-generator do you think? Steve, I've been working for myself for 6 and a half years, using SmartCAM for about 11 years. I sell (did sell?) SmartCAM, write macros and code-generators and do sub-contract programming. I'm either so busy I work all hours or I have nothing to do. Sure beats having a jerk for a boss though! Regards, Bill in the UK. ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
