I am trying to set up my template file to call a programmable offset and a fixture offset. The programmable offset needs to be called according to a particular process. Example: D1 for Facing, D2 for Slab Milling, and D3 for Boring. The fixture offset needs to change with the rotation. Example: For D1 I need B90 to equal H1, B180 to equal H2, B270 to equal H3, B0 to equal H4.
For D2 I need B90 to equal H2, B180 to equal H3, B270 to equal H4, B0 to equal H1. For D3 I need B90 to equal H3, B180 to equal H4, B270 to equal H1, B0 to equal H2. Trying to set up a Accramatic 950 template file. If anyone has had to do this, I need a little help. -- Kevin M. Clark Programmer Abbott Workholding Inc. ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
