|
Hey Group.
In the Post file below (Post 0) the
Z0.0 is burnt into the program.
How can I make it default to Z0.0 like (Sample 1)
without having to
add a point before the tool and only change it when
I want to?
Sometimes when I program angle holes in a part on a tombstone
I want the Z0.0 to be like Z6.0 as in (Sample 2) then
do the
B axis rotation. What is it that I need to do to the G43 Z0.0
to do that?
(Post 0)
M106 (#TLCMT)
<T#NTOOL> #S17 #MOV< X#XPOS>< Y#YPOS> S#SPEED #SPNDL G43 Z0.0 H#LOFF> (Sample 1)
M106 (1/2" DIA. CARBIDE O.H. DRILL TOOL 108)
T109 M50 G00 X1.750 Y2.125 S5042 M03 G43 Z0.0 H108 G98 G81 Z-1.645 R0.1 F100.0 X2.5
Y1.0
X1.750
G80 M09
M107
(Sample 2)
M106 (1/2" DIA. CARBIDE O.H. DRILL TOOL 108)
T109 M50 G00 X1.750 Y2.125 S5042 M03 G43 Z6.0 H108 B15 M28 G98 G81 Z-1.645 R-0.75 F60.0
G80 M09
M107
Thanks in advance.
Jeff Pieper
EATON Hydraulics
Petersburg, IL |
