It sounds like you are getting the warning window pop-up but it is either
behind other windows or off the screen. If it is off the screen you could
try to set the screen resolution as high as possible and look for the
pop-up outside the normal view and drag it back before you close it.
Hope this helps.
Jim S.
>
> Awhile back I posted this problem to the group.
>
> We run SmartCAM using Windows 2000 Professional version as
the operating system.
>
> I've been experiencing a problem with SmartCAM for the last
couple of weeks
> The problem is as follows.
> I open a .pm4 file. Make a change to the process model so that
"Modified" word shows
> up on the blue task bar at the very top of the graphics window.
>
> Now lets say I decide that I want to do something like merge
another .pm4 file before I do
> a File Save or Save As.
> This is where the warning box should appear with the following
message,
> "Process model has been modified. Do you want to say the
changes?" Yes No Cancel
> With the operative word here being should because on my PC that
warning box does
> not appear and what ever I had done to that process model to that
point is automatically
> saved. Then to make matters worse, the graphics window is
locked out. I cannot use the
> mouse to pick anything.
> I can still use the key stokes like ALT File, Save but no mousing
period.
> My only option is to ALT File, Exit SmartCAM and reload it. Now
everything is reset itself
> and is working fine.
> It will remain that way only if I do a File Save or Save AS before I
do any FILE operation.
>
>
> Got some answers back but I'm still dealing with this problem on a
daily basis.
>
> I was recording a macro that captured the above problem as a
HOTSAVE[] macro command.
>
> Below is a screen capture of the description taken from "the official
smartcam macro
> dictionary.pdf" file.
> This is exactly what happens to my install of SC.
> Does anybody know if this feature is a configurable option that can
be turned off or on?
>
>
>
>
>
>
>
> Regards,
> Michael Senack
>
Jim Schellpfeffer
Machine Dev. & Maint. Group
[EMAIL PROTECTED]
(630)840-4029
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
