Thanks I will give it a try this morning. John
CBR Industries, Inc. CNC Milling & Turning www.cbrcnc.com -----Original Message----- From: Dave Wolfgang [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 7:21 AM To: John Coulston; SmartCAM Subject: Re: [mfg-smartcam] G5/G9 Glass Melamine speed and feeds I have worked with Melamine with success. Your SFP for drilling should be around 150. And IPR on the drill about .001 If your milling you should consider carbide mills. It machines very nice, but very abrasive. Dave Wolfgang CNC Programmer/Supervisor www.hrindustries.net ----- Original Message ----- From: "John Coulston" <[EMAIL PROTECTED]> To: "SmartCAM" <[EMAIL PROTECTED]> Sent: Wednesday, July 23, 2003 5:30 PM Subject: [mfg-smartcam] G5/G9 Glass Melamine speed and feeds > Has anyone worked with this material? Have any thoughts on feeds and > speeds? I need to profile and drill and tap a few 2-56 holes. I think I > got myself into a SOB part I should have doubled my quote. > > Thank you, > > John > > > CBR Industries, Inc. > CNC Milling & Turning > www.cbrcnc.com > > ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
