If this is the output verbatim,
"G03 X10.0 Y0.0 Z-50 I0.0 J0.0 K-10.0 F"
then it looks like it'd trying to output the feed, but the #FEED variable is set to nothing, or null, or whatever it's called in SC. Try putting in a user varable in the shape file before this tool runs (e.g. #FEED=400.). Code the file and post back what you get.
-Dave-
Sent by: [EMAIL PROTECTED]
To:
"'Jeff Brower'"
<[EMAIL PROTECTED]>, "smartcam" <[EMAIL PROTECTED]>
cc:
Subject:
RE: [mfg-smartcam]
Date: Sat, 13 Dec 2003 15:00:09 -0000
Yep that was the first thing I checked
-----Original Message-----
From: Jeff Brower [mailto:[EMAIL PROTECTED]
Sent: 13 December 2003 17:22
To: 'Martin'; smartcam
Subject: RE: [mfg-smartcam] Date: Sat, 13 Dec 2003 15:00:09 -0000
Is there a feed rate for that tool in the step list?
-----Original Message-----
From: Martin [mailto:[EMAIL PROTECTED]
Sent: Saturday, December 13, 2003 7:00 AM
To: smartcam
Subject: [mfg-smartcam] Date: Sat, 13 Dec 2003 15:00:09 -0000
I do have it written as FEED
Feed just typo error in E-mail
G01 Z0.0 F200
(FEED DOWN IN Z)
G03 X10.0 Y0.0 Z-50 I0.0 J0.0 K-10.0 F
(Feed should be 400
but there is nothing)
Will double check when I get back to work on Monday.
======================================================================
To find out more about this mailing list including how to unsubscribe,
send
the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
