Go to NAPA and get them to pull out the Thermosensor Book. You'll find
hundreds, with a range of connector styles, thread types and on temps
all documented.
 
Or just wire it straight into the ignition.

Keith Tanner
Flyin' Miata
[EMAIL PROTECTED]
http://www.flyinmiata.com <http://www.flyinmiata.com/> 
1-800-FLY-MX5s (orders)
1-970-464-5600 (tech)
2008 FM Open House: August 14-17


 


________________________________

        From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
        Sent: Tuesday, July 08, 2008 9:23 AM
        To: Ray Ayala
        Cc: [EMAIL PROTECTED]; [email protected]
        Subject: Re: NMC - Electric rad. fan control
        
        

        It does have AC (that miraculously works!).. so we need to
intercept the engage wire and rig that up properly as well. 
        
        Looks like (thanks Rob!) I can pillage a temp switch off an
Escort GT/Miata, which will give me a turn on around 206*F/97*C... so
that's half the battle. I forgot the Miata has one, since mine has been
broken off for a couple of years and I use ECU control instead.
        
        Anyone know of other vehicles that have a thermoswitch that
might be lower (something closer to 185-190)?
        
        Wallyman
        
        
        
         "Ray Ayala" <[EMAIL PROTECTED]>
        
        
        

                                "Ray Ayala" <[EMAIL PROTECTED]> 
                                Sent by:
[EMAIL PROTECTED] 

                                07/08/2008 09:47 AM
                                

 

To

"Rob Ebersol" <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>  


cc

[email protected]       


Subject

Re: NMC - Electric rad. fan control     
                

        You'll need a 2nd relay if the car has A/C.  It should turn on
when the A/C 
        compressor runs.
        
        
        ----- Original Message ----- 
        From: "Rob Ebersol" <[EMAIL PROTECTED]>
        To: <[EMAIL PROTECTED]>
        Cc: <[email protected]>
        Sent: Tuesday, July 08, 2008 6:15 AM
        Subject: Re: NMC - Electric rad. fan control
        
        
        > Use any OE thermoswitch (near the desired on temp) to throw a
relay
        > to ground. They shouldn't be more than $5 salvage.
        >
        > On Jul 8, 2008, at 8:55 AM, [EMAIL PROTECTED] wrote:
        >
        >> Got a buddy with a 70 Cutlass, converting to electric fans on
the
        >> super cheap. Have the fans already (2 speed/3 wire dual fan
        >> assembly from early 90's Intrepid) but we need a fan
controller.
        >> Does anyone have a cheap and easy way to turn them on/off @ a
set
        >> (or adjustable) water temp? I see Jeg's has stuff in the $40+
        >> range, just wondering if there is a budget DIY option out
there for
        >> cheaper.
        >>
        >> Thanks.
        >>
        >> Wallyman
        >> _______________________________________________
        >> Miatapower mailing list
        >> [email protected]
        >> 
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
        >
        > _______________________________________________
        > Miatapower mailing list
        > [email protected]
        > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

        
        _______________________________________________
        Miatapower mailing list
        [email protected]
        http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
        
        

<<graycol.gif>>

<<ecblank.gif>>

_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to