Ken, I totally agree. I installed one on my 90, I also upgraded from stock
shock and springs to Tokico Illumina shocks and FM springs. The amazing
thing is the ride actually feel better than stock, even though I have
uprated springs and shocks.

I also agree about the drivers side front mounting bolt, no way can you get
that very tight. I plan to get my car back up on a lift to try and get it
tighter.

On Sun, Mar 29, 2009 at 8:35 AM, Ken Bogart <[email protected]> wrote:

> I received my Butterfly Brace from FM on Friday and installed it
> yesterday afternoon on my 96. Installation is a pain, but not
> difficult. The hardest part is setting the height of the center
> section as one of the bolts is totally inaccessible to properly
> tighted. (any tips for the front drivers side fastener of the center
> section would be appreciated!)
>
> A short test drive showed the car felt considerably tighter. The car
> feels more solid and flexes less over expansion joints and rough
> patches. Seems like cowl flex is greatly reduced; only the roughest
> roads shake the cowl. Its not a different var, but it feels like it
> took 10 years off the tired chassis.
>
> I would like to get it out again today, but the weather is not great.
> I guess I will have to wait to really see how much different it is. I
> suspect its one of those things that is quickly adjusted to and you no
> longer "feel" a difference becuase you forget how the car used to
> flex.
>
>
> Ken Bogart
> -----------------------------------------------------
> 96 Montego Blue FFS Coldside (His)
> 97 Black & Tan (Hers)
> 90 Crystal White (sons)
> ------------------------------------------------------
> http://www.miatacare.com
> http://www.cincimiata.com
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to