In a message dated 3/29/2009 8:59:13 A.M. Eastern Standard Time,  
[email protected] writes:

I also  agree about the drivers side front mounting bolt, no way can you get 
that very  tight. I plan to get my car back up on a lift to try and get it  
tighter.



RE: that bolt that is so difficult to tighten, try this:  Get a  
short-handled open end wrench, put it over the nut inside the box, then use a  
socket or 
another wrench to tighten.  You'll have to wiggle the inside  wrench off, but 
when it is removed the nut will still be tight enough to snug it  with the 
socket.  
Sorry, I hope you can imagine what I'm suggesting.  
Others have had success using "wobble" sockets that fit loosely on the  
extension. I think "wobbles" are the preferred  method. 
**************A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100126575x1220439616x1201372437/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26hmpgID
%3D62%26bcd%3DfebemailfooterNO62)
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to