Two things that I did that I really liked in my first garage: Covered the walls in 3/8 plywood instead of drywall (mount anything anywhere without worry) Ran hard lines with air fittings about every 15' (about 8 connections) and had two retractable reels on the ceiling for instant use; one air, one electric.
I also have a wash basin (but only cold water, might consider a small hot water heater) and more power outlets than you can shake a stick at, including one in the middle of the floor for the table saw. My second garage has Internet and TV, and the previous owner had flexible air lines that he took when he sold it. Making a good sound dampening box for the air compressor would be high on my list too. I currently want to do something like those plastic floor tiles that raise you up a quarter of an inch to let snow and water drain below the working surface. A lift or pit would be ideal, but my roof is too low and tearing up my floor isn't really in the cards. Enjoy! Mark Sent from my iPhone On Oct 12, 2011, at 10:56 AM, Ken Bogart <[email protected]> wrote: > When I build mine.. I want the following: > > - 2-post lift bay > - a walled and drained wash bay > - a work bay (machine tools, work bench) > - a room for hanging out with couch, tv, bar, bathroom > - open indoor area to park at least 6 cars > - a storage/parts area (in a loft?) > > I figure this would have to be at least 2500sf or larger... > > > Ken Bogart > ----------------------------------------------------- > 96 Montego Blue FFS Coldside (His) > 97 Black & Tan (Hers) > 90 Crystal White (sons) > ------------------------------------------------------ > http://www.miatacare.com > http://www.cincimiata.com > http://www.bcchallenger.org > MiataMail.com list owner > > > On Wed, Oct 12, 2011 at 1:46 PM, Helsel, Walt <[email protected]> wrote: > So, moving to a new home.. going to have either an existing or built pole > building for the car-addiction. Looking for those of you with Garage-Mahals > to chime in. Right now I am working out of a 2 stall garage 24x24x8. > Workbench in the front on a 5’ deep raised stoop, wood heated, partially > insulated. There is not enough width for working on cars with crap along > walls (crap being a parts washer, bench grinder, shelving, etc) and it’s > fairly crowded with all the big stuff (woodstove, engine hoist, engine > stand, blast cabinet, drill press, band saw, table saw, 3 welders, etc) that > is all roaming the space. So, looking for suggestions and advice from those > of you that have dedicated hobby space… > > > > Things you would do again > > Things you regret doing > > Layout suggestions > > Storage ideas > > Workbench ideas (location, layout, etc) > > > > Anything else you think might be useful. I would love to go to a 2 post lift > down the road so I want at least one high bay for that, but for now I’m > thinking something like this: > > > > 28’w x 40 (or 48’)’l x 14’h > > 2 stalls wide, with workshop in the front (away from the doors) > > 2 overhead doors on short end, 1 mandoor, some windows of some variety for > light. > > Concrete floor and approach > > 220v electric > > Water if I am lucky > > Insulated and heated (Michigan winters) > > Will be wired for music, internet and phone as well. > > > > So, toss your ideas out.. I’m game to start figuring out how to set up the > future work space! > > Wallyman > > > > > > > > This e-mail and any attachments contain URS Corporation confidential > information that may be proprietary or privileged. If you receive this > message in error or are not the intended recipient, you should not retain, > distribute, disclose or use any of this information and you should destroy > the e-mail and any attachments or copies. > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > > > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
