I've not been able to find any other evidence of that, but that's what's going through my mind to Eric.
I'm making the run down to the Tri-Cities Miata Club's ZOOMIN' THE MOUNTAINS OF EAST TENNESSEE event this weekend. I'll check it again when I'm back and see how it looks. It might be a good idea to replace that caliper. The rotors are ADB units that were put on with the pads last fall. Thanks, El Brown—O— Thanks to you too, Bill. If you haven't seen it, I'd say it isn't a common problem. On Jun 4, 2013, at 11:03 AM, Eric Schieb wrote: > Could that caliper be dragging? . . . Resulting in an abnormal amount of > heat at that corner. > > Eric Schieb > > On 6/4/2013 10:26 AM, David Brown wrote: >> Q: 2001 LS — I have a recurring issue with the slider pin in my right front >> caliper. I'm running with the second set of Carbotech Bobcat (street) pads. >> My mechanic buddy suspects the rubber baffle material on that pin is the >> culprit. Every time we check that corner, it is stiff and the grease has >> degraded. Is this a common problem? Any suggestions? >> _______________________________________________ >> Miatapower mailing list >> [email protected] >> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
