Hi Rick

wait wait wait...
do you have both Microdia driver versions installed simultaneously ?

also 6242 support may be buggy, can you try again without the microdia
module loaded
and post dmesg with log_level=0x04

-JoJo

On Fri, Feb 6, 2009 at 3:16 AM, Rick Miles <[email protected]> wrote:
> I've posted under a new subject as the message has changed. I have libv4l and 
> the
> newly compiled module  installed and here is dmesg output.
>
> usb 1-10: new high speed USB device using ehci_hcd and address 2
> usb 1-10: configuration #1 chosen from 1 choice
> usb 1-10: New USB device found, idVendor=0c45, idProduct=6242
> usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> usb 1-10: Product: USB20 Camera
> sn9c20x: SN9C20X USB 2.0 Webcam - 0C45:6242 plugged-in.
> sn9c20x: Detected MT9M111 Sensor.
> sn9c20x: Webcam device 0C45:6242 is now controlling video device /dev/video1
> sn9c20x: Using yuv420 output format
> usbcore: registered new interface driver sn9c20x
> sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded
> microdia: Microdia USB 2.0 webcam driver loaded
> usbcore: registered new interface driver usb_microdia_driver
> microdia: v2008.10 : Microdia USB 2.0 Webcam Driver
>
> The microdia module used to work well enough for my daughter but this module
> brings no joy. Xcam just shows black an grey horizontal bars. Mplayer and amsn
> config ap have colour but everything looks like an amoeba or something. I've
> attached two pics.
>
> Any suggestions? I don't code but I can test. I'm running slackware-12.2 and
> kernel is a stock 2.6.27.7-smp.
>
>
>
> --
> Cheers,
>
> Rick Miles
>
> Need a carpenter, painter or handyman?
> http://rickmiles.com.au
>
> Written on Boomtime, the 37th of Chaos, 3175
> http://turtlespond.net

--~--~---------~--~----~------------~-------~--~----~
Lets make microdia webcams plug'n play, (currently plug'n pray)
To post to this group, send email to [email protected]
Visit us online https://groups.google.com/group/microdia
-~----------~----~----~----~------~----~------~--~---

Reply via email to