from the windows .inf file it should be SN9C120 + OV7630 Driver CD is WB-3250p
On Thu, Feb 26, 2009 at 2:55 PM, JoJo jojo <[email protected]> wrote: > > Hi Marco > > The driver you are using is not sn9c20x > its called sn9c102 > > its unable to detect the image sensor in your 613e > > can you find out the image sensor, look here for reference > > https://groups.google.com/group/microdia/web/howto-get-information-on-your-webcam > > -JoJo > > On Thu, Feb 26, 2009 at 5:48 PM, Marco Crociani > <[email protected]> wrote: > > > > Hi, > > I have a "Trust Chat & VoIP Pack Hi-Res" that doesn't work on Ubuntu > > Intrepid 8.10. > > I see this ( > > > http://groups.google.com/group/microdia/browse_thread/thread/dea83053b1e40ea6/09f66e0794924271?lnk=gst&q=613e#09f66e0794924271 > > ) thread but I don't have /dev/video0 or /dev/video1 > > > > > > $ dmesg > > [ 5532.992357] usb 4-2.3: new full speed USB device using ehci_hcd and > > address 9 > > [ 5533.113976] usb 4-2.3: configuration #1 chosen from 1 choice > > [ 5533.286798] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers > > v1:1.47pre49 > > [ 5533.288388] usb 4-2.3: SN9C120 PC Camera Controller detected > > (vid:pid 0x0C45:0x613E) > > [ 5533.315625] usb 4-2.3: No supported image sensor detected for this > > bridge > > [ 5533.318676] usbcore: registered new interface driver sn9c102 > > > > > > $ lsmod |grep sn9 > > sn9c102 149124 0 > > videodev 41344 1 sn9c102 > > usbcore 149360 7 > > sn9c102,usbhid,usb_storage,libusual,ehci_hcd,uhci_hcd > > > > $ lsusb > > Bus 004 Device 009: ID 0c45:613e Microdia PC Camera (SN9C120) > > > > > ................. > > > > > > after sudo insmod ./sn9c20x.ko > > > > dmesg > > [ 7838.035755] usbcore: registered new interface driver sn9c20x > > [ 7838.035909] sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded > > > > Regards, > > Marco Crociani > > > > -- Marco Lorenzo Crociani, [email protected] Telefono: +39 02320622509 Fax: +39 02700540121 --~--~---------~--~----~------------~-------~--~----~ Lets make microdia webcams plug'n play, (currently plug'n pray) To post to this group, send email to [email protected] Visit us online https://groups.google.com/group/microdia -~----------~----~----~----~------~----~------~--~---
