Brian Johnson schrieb:
> After inserting the driver module what does dmesg show? It should have
> infomration printed to it from our driver about what webcam was
> detected or any errors if it could not detect a webcam
>
> On Sun, Mar 29, 2009 at 12:48 PM, sweacher <[email protected]> wrote:
>
>> Hi Brian
>>
>> i know, but ther is no device /dev/videoN/ or such else
>> no videoN in device /dev
>>
>> sweacher
>>
>>
>> On 28 Mrz., 17:21, Brian Johnson <[email protected]> wrote:
>>
>>> You should be looking for /dev/videoN where N is some number most
>>> likely if this is your only video device it will be 0. ie /dev/video0.
>>>
>>> On Sat, Mar 28, 2009 at 9:01 AM, sweacher <[email protected]> wrote:
>>>
>>>
>>>> hi
>>>>
>>>> my cam was running fine
>>>>
>>>> but since yesterday opebsuse 11 will not find libv4l ( i think so )
>>>> vlc-media-player send this
>>>>
>>>> Ihre Eingabe konnte nicht geöffnet werden:
>>>> VLC kann die MRL 'v4l2://' nicht öffnen. Sehen Sie für Details im
>>>> Fehlerprotokoll nach.
>>>>
>>>> Translation:
>>>> your input could not be opened
>>>> vlc could not open `v4l2:// . See details in errorprotocol
>>>>
>>>> I did reinstall libv4l -- that didnt help
>>>>
>>>> I could also not find the devise " /dev/video/ -- it was not created
>>>> why??
>>>>
>>>> greedings sweacher
>>>>
>
> >
>
>
please look at this
i could not understand *g
w...@linux-oq6q:~> dmesg
Linux version 2.6.25.20-0.1-default (ge...@buildhost) (gcc version 4.3.1
2008050
7 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP
2008-12-12
20:30:38 +0100
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005ff40000 (usable)
BIOS-e820: 000000005ff40000 - 000000005ff50000 (ACPI data)
BIOS-e820: 000000005ff50000 - 0000000060000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
639MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00ff780] 000ff780
Entering add_active_range(0, 0, 393024) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 393024
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 393024
On node 0 totalpages: 393024
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 1278 pages used for memmap
HighMem zone: 162370 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000F6810, 0014 (r0 ACPIAM)
ACPI: RSDT 5FF40000, 0030 (r1 A M I OEMRSDT 4000625 MSFT 97)
ACPI: FACP 5FF40200, 0081 (r2 A M I OEMFACP 4000625 MSFT 97)
ACPI: DSDT 5FF40350, 35AC (r1 1ABVA 1ABVA003 3 INTL 2002026)
ACPI: FACS 5FF50000, 0040
ACPI: APIC 5FF40300, 004A (r1 A M I OEMAPIC 4000625 MSFT 97)
ACPI: OEMB 5FF50040, 003F (r1 A M I OEMBIOS 4000625 MSFT 97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:6 APIC version 16
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 70000000 (gap: 60000000:9ff80000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389954
Kernel command line:
root=/dev/disk/by-id/scsi-SATA_Hitachi_HDS7216_PV7704ZDR3PS
WV-part2 splash=silent
bootsplash: silent mode.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1250.527 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1547748k/1572096k available (1947k kernel code, 22952k reserved,
1630k d
ata, 256k init, 654592k highmem)
virtual kernel memory layout:
fixmap : 0xffdf2000 - 0xfffff000 (2100 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0487000 - 0xc04c7000 ( 256 kB)
.data : 0xc02e6fbd - 0xc047e96c (1630 kB)
.text : 0xc0100000 - 0xc02e6fbd (1947 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 2504.40 BogoMIPS
(lpj=5008815)
Security Framework initialized
AppArmor: AppArmor initialized <NULL>
AppArmor: Registered secondary security module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 18k freed
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 525 Objects with 53 Devices 143 Methods 27 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode
successful
CPU0: AMD Athlon(tm) XP stepping 02
Total of 1 processors activated (2504.40 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on
int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 0
Runtime GPEs
in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package
initialization:..........................
.........................................................................
Initialized 22/27 Regions 28/28 Fields 40/40 Buffers 9/12 Packages (534
nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:
Executed 0 _INI methods requiring 0 _STA executions (examined 56 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
system 00:0a: ioport range 0x295-0x296 has been reserved
system 00:0a: ioport range 0x3e0-0x3e7 has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x800-0x87f has been reserved
system 00:0a: ioport range 0x400-0x41f has been reserved
system 00:0b: iomem range 0xfec80000-0xfec800ff has been reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x5fffffff could not be reserved
system 00:0c: iomem range 0x0-0x0 could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 0xfca00000-0xfeafffff
PREFETCH window: 0x00000000bff00000-0x00000000cfefffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 5343k freed
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1238358317.844:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 256k freed
Write protecting the kernel read-only data: 1444k
input: AT Translated Set 2 keyboard as /class/input/input1
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
pata_via 0000:00:0f.1: version 0.3.3
ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata1.00: ATA-7: SAMSUNG SP0842N, BH900-41, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48
ata1.01: ATA-7: Hitachi HDS721680PLAT80, P21OA8BA, max UDMA/133
ata1.01: 156301488 sectors, multi 16: LBA48
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/133
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
ata2.00: ATAPI: HL-DT-STDVD-RAM GSA-H54N, 1.00, max UDMA/66
ata2.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
ata2.00: configured for UDMA/66
ata2.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0842N BH90 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA Hitachi HDS72168 P21O PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H54N 1.00 PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
sata_via 0000:00:0f.0: version 2.3
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 10
scsi2 : sata_via
scsi3 : sata_via
ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe400 bmdma 0xd800 irq 20
ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd808 irq 20
ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
ACPI: ACPI0007:00 is registered as cooling_device0
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO
or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO
or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO
or FUA
sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO
or FUA
sdb: sdb1 sdb2 sdb3
sd 0:0:1:0: [sdb] Attached SCSI disk
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.20-0.1-default uhci_hcd
usb usb1: SerialNumber: 0000:00:10.0
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebff400
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.20-0.1-default ehci_hcd
usb usb2: SerialNumber: 0000:00:10.4
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.20-0.1-default uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000cc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 2-0:1.0: over-current change on port 3
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.20-0.1-default uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 2-0:1.0: over-current change on port 4
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.25.20-0.1-default uhci_hcd
usb usb5: SerialNumber: 0000:00:10.3
hub 2-0:1.0: over-current change on port 7
hub 2-0:1.0: unable to enumerate USB device on port 7
hub 2-0:1.0: over-current change on port 8
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: not running at top speed; connect to a high speed hub
usb 5-1: configuration #1 chosen from 1 choice
usb 5-1: New USB device found, idVendor=0c45, idProduct=627b
usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-1: Product: USB20 Camera
Linux agpgart interface v0.103
agpgart: Detected VIA KT880 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 17
eth0: RealTek RTL8139 at 0xf881e800, 00:0e:2e:5f:56:f7, IRQ 17
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
scsi 1:0:0:0: Attached scsi generic sg2 type 5
scsi 1:0:1:0: Attached scsi generic sg3 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region
SMOV [0x
400-0x406]
ACPI: Device needs an ACPI driver
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP]
ppdev: user-space parallel port driver
Adding 2104472k swap on /dev/sdb1. Priority:-1 extents:1 across:2104472k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
[email protected]
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
type=1505 audit(1238351129.049:2): operation="profile_load"
name="/bin/ping" nam
e2="default" pid=1209
type=1505 audit(1238351129.089:3): operation="profile_load"
name="/sbin/klogd" n
ame2="default" pid=1218
type=1505 audit(1238351129.161:4): operation="profile_load"
name="/sbin/syslog-n
g" name2="default" pid=1219
type=1505 audit(1238351129.273:5): operation="profile_load"
name="/sbin/syslogd"
name2="default" pid=1220
type=1505 audit(1238351129.413:6): operation="profile_load"
name="/usr/sbin/avah
i-daemon" name2="default" pid=1231
type=1505 audit(1238351129.561:7): operation="profile_load"
name="/usr/sbin/iden
td" name2="default" pid=1241
type=1505 audit(1238351129.729:8): operation="profile_load"
name="/usr/sbin/mdns
d" name2="default" pid=1246
type=1505 audit(1238351129.901:9): operation="profile_load"
name="/usr/sbin/name
d" name2="default" pid=1259
type=1505 audit(1238351130.005:10): operation="profile_load"
name="/usr/sbin/nsc
d" name2="default" pid=1279
type=1505 audit(1238351130.137:11): operation="profile_load"
name="/usr/sbin/ntp
d" name2="default" pid=1285
powernow-k8: Processor cpuid 662 not supported
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 17
eth0: no IPv6 routers present
PPP generic driver version 2.4.2
NET: Registered protocol family 24
ppp0 renamed to dsl0
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
warning: `named' uses deprecated v2 capabilities in a way that may be
insecure.
w...@linux-oq6q:~>
sweacher
--~--~---------~--~----~------------~-------~--~----~
Lets make microdia webcams plug'n play, (currently plug'n pray)
To post to this group, send email to [email protected]
Visit us online https://groups.google.com/group/microdia
-~----------~----~----~----~------~----~------~--~---
