Hello. I was a happy owner of a 0c45:6270 model. I was testing it in my recent fresh install of Debian Lenny and it worked fine.
But now, it has automatically stopped working and when I plug it, this is the output of dmesg: [ 1323.636031] usb 1-9: new high speed USB device using ehci_hcd and address 9 [ 1323.770673] usb 1-9: New USB device found, idVendor=0c45, idProduct=6270 [ 1323.770682] usb 1-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1323.770688] usb 1-9: Product: USB20 Camera [ 1323.770884] usb 1-9: configuration #1 chosen from 1 choice [ 1323.771679] sn9c20x: SN9C20X USB 2.0 Webcam - 0C45:6270 plugged-in. [ 1323.798792] sn9c20x: I2C slave 0x5d returned error during write to address 0xff [ 1323.799289] sn9c20x: I2C slave 0x5c returned error during write to address 0x01 [ 1323.799786] sn9c20x: I2C slave 0x5d returned error during write to address 0xf0 [ 1323.800285] sn9c20x: I2C slave 0x48 returned error during write to address 0xf0 [ 1323.800291] sn9c20x: Unsupported sensor. [ 1323.800320] sn9c20x: probe of 1-9:1.0 failed with error -22 Unsupported sensor!!??! What the h.. Does it mean that I have a bricked webcam? How could it happen? Is it possible to unbrick it?? At the moment the only use of it seems to be used as flashlight... :( -- Regards, Pablo. --~--~---------~--~----~------------~-------~--~----~ Lets make microdia webcams plug'n play, (currently plug'n pray) To post to this group, send email to [email protected] Visit us online https://groups.google.com/group/microdia -~----------~----~----~----~------~----~------~--~---
