Fellow group members:
I'm constructing a crossflow turbine for a high-flow
low-head canal. The head is about 5 feet, and the flow is
3-6 cubic feet per second.
I have designed a runner with a diameter of 20 inches and a
length of 60 inches. There are 25 blades with a central angle of 42
degrees and a radius of 7.38 inches (following Aziz' design)
I want to construct a wide nozzle to capture all the flow -
could you help with some theoretical proportions for the nozzle? I'd
The literature isn't very clear on this... I would
greatly appreciate it!!
Thanks!
Mike Bishop
[EMAIL PROTECTED]
------------------------ Yahoo! Groups Sponsor --------------------~-->
In low income neighborhoods, 84% do not own computers.
At Network for Good, help bridge the Digital Divide!
http://us.click.yahoo.com/EA3HyD/3MnJAA/79vVAA/FGYolB/TM
--------------------------------------------------------------------~->
Does your company feature in the microhydro business directory at
http://microhydropower.net/directory ? If not, please register free of charge
and be exposed to the microhydro community world wide!
NOTE: The advertisements in this email are added by Yahoogroups who provides us
with free email group services. The microhydro-group does not endorse products
or support the advertisements in any way.
More information on micro hydropower at http://microhydropower.net
To unsubscribe: send empty message to [EMAIL PROTECTED]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/microhydro/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
