I would imagine they would have a switch chip in them. Under the switch menu it will list ports and which switch they belong to, you can check in there. Also, the Routerboard Firmware would have been my first go-to.
Bryce D NETAGO From: [email protected] [mailto:[email protected]] On Behalf Of Justin Miller Sent: Monday, December 15, 2014 6:47 To: Mikrotik Users Subject: Re: [Mikrotik Users] master port configuration on RB850Gx2 I have a few of these and noticed they don't like connecting by Winbox MAC address at all. Do they even have switch chips in them? Justin Miller VA SkyWire, LLC 1707 E Main St<x-apple-data-detectors://0/0> Richmond, VA 23223 Office: (804) 521-4212<tel:(804)%20521-4212> Desk: (804) 591-0500 ext 101<tel:(804)%20591-0500;101> Fax: (804) 591-1559<tel:(804)%20591-1559> [email protected]<mailto:[email protected]> The information contained in this electronic message from VA SkyWire, LLC is privileged, confidential, or otherwise protected from disclosure. It is intended only for the use of the individual or entity named above. If you are the intended recipient of this message, you are hereby notified that you may not forward, distribute, copy or disclose the contents of this email without notifying the sender of this email. If you are not the named addressee, then any disclosure, copying, publication, distribution, or other use of the contents of this electronic message is strictly prohibited.. If you have received this communication in error, please notify Scott Coonfield at (804) 521-4212<tel:(804)%C2%A0521-4212> or by return e-mail to [email protected]<mailto:[email protected]>, and purge the communication immediately without making any copy or distribution. Thank You. On Dec 15, 2014, at 6:11 AM, Forrest Christian (List Account) <[email protected]<mailto:[email protected]>> wrote: I have a new RB850Gx2 which I'm attempting to configure - specifically I'd like to rearrange the master/slave ports... So, log into webfig, click on interfaces, ethernet, click on a port, then scroll down to 'master port'..... Wait, it isn't there. Just to make sure I wasn't confused about where the setting was, I logged into one of the rb2011's which are on the network here and, yep, that's right where it was. Upgraded firmware to the latest 6.23 (hoping the bug about showing switch configuration fixes it), and still no option. Am I missing something? I ended up doing the reassignment via the command line, but I'd rather just use webfig. -forrest _______________________________________________ Mikrotik-users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/mikrotik-users
_______________________________________________ Mikrotik-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/mikrotik-users
