They will show red if the ports are down or disabled.
On 8/1/2018 13:00, mike.lyon--- via Mikrotik-users wrote: > I’ve taken the master-port assignment off of all ports and have assigned IP > addressess to eth1, eth2 and eth3 and have also removed all bridges. > > I can setup a DHCP server on eth1 but when i try to setup dhcp servers for > eth2 and eth3, the DHCP configurations all show up as red, except for eth1. > > Sounds like maybe ports 2-5 are configured as switchports. > > Any ideas? > > Thanks, > Mike > _______________________________________________ > Mikrotik-users mailing list > Mikrotik-users@wispa.org > http://lists.wispa.org/mailman/listinfo/mikrotik-users -- Scott Reed SBRConsulting, LLC Network and Wireless Consulting WISPA Vendor Member IN UMC Associate Lay Leader SLI Coach Trained --- This email has been checked for viruses by AVG. https://www.avg.com _______________________________________________ Mikrotik-users mailing list Mikrotik-users@wispa.org http://lists.wispa.org/mailman/listinfo/mikrotik-users