Yes same cable. Terry Trumbo Pronetwork Solutions,LLC http://www.pronetworksols.com Phone 270-734-9049 Cell 270-360-1024 Fax 270-360-1058
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Shayne Lebrun Sent: Thursday, November 04, 2010 1:02 PM To: 'Mikrotik discussions' Subject: Re: [Mikrotik] Duplex mismatches When you try a second device, is it using the same Ethernet cable? > -----Original Message----- > From: [email protected] [mailto:mikrotik- > [email protected]] On Behalf Of Terry Trumbo > Sent: November-04-10 11:28 AM > To: [email protected] > Subject: [Mikrotik] Duplex mismatches > > Having problems with a 433 board with duplex mismatch. My switch is set to > auto and the Mikrotik is set to auto and it will run just 100 half. Hard code both > devices to 100 full still run 100 half. Try another device in the same port on the > switch and it does 100 full no problem. He switch is a Netgear GS108T. Any ideas? > > > > Terry Trumbo > > Pronetwork Solutions,LLC > > http://www.pronetworksols.com > > Phone 270-734-9049 > > Cell 270-360-1024 > > Fax 270-360-1058 > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://www.butchevans.com/pipermail/mikrotik/attachments/20101104/55d6 > 8f04/attachment.html> > _______________________________________________ > Mikrotik mailing list > [email protected] > http://www.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS _______________________________________________ Mikrotik mailing list [email protected] http://www.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS _______________________________________________ Mikrotik mailing list [email protected] http://www.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
