Firstly because I think it can handle what I am throwing at it. Secondly,
because the CCR is the only thing I can find with 4 SFPs and some gigabit
copper ports that is price effective for this role. I also intend to use it
in a routing capacity in the near future.

-Ty


On Mon, Mar 24, 2014 at 1:40 PM, Blake Covarrubias <bl...@beamspeed.com>wrote:

> Ty,
>
> Correct me if I'm wrong, but aren't bridges on MikroTik handled in
> software rather than hardware like the Switch chip? Why would you replace a
> device that can do wire-speed switching in hardware for one that tries to
> do it in software?
>
> --
> Blake Covarrubias
>
> On Mar 21, 2014, at 3:58 PM, Ty Featherling <tyfeatherl...@gmail.com>
> wrote:
>
> > Thank you. I forgot to say I will be adding a trunk port on ether2 so I
> > wanted to be prepared to do so.
> >
> > -Ty
> > On Mar 21, 2014 4:55 PM, "Chupaka" <chup...@gmail.com> wrote:
> >
> >> you don't need bridgeTRUNK for your described task. but it should work
> also
> >> with your config
> >>
> >> /interface bridge
> >> add l2mtu=1590 name=bridgeACCESS-50
> >> add name=bridgeACCESS-51
> >>
> >> /interface vlan
> >> add interface=sfp1 l2mtu=65531 name=vlan50 vlan-id=50
> >> add interface=sfp1 l2mtu=65531 name=vlan51 vlan-id=51
> >>
> >> /interface bridge port
> >> add bridge=bridgeACCESS-50 interface=vlan50
> >> add bridge=bridgeACCESS-51 interface=vlan51
> >> add bridge=bridgeACCESS-50 interface=sfp2
> >> add bridge=bridgeACCESS-50 interface=sfp3
> >> add bridge=bridgeACCESS-50 interface=sfp4
> >> add bridge=bridgeACCESS-51 interface=ether1
> >>
> >> --
> >> Подпись:
> >> (добавляется в конце всех исходящих писем)
> >>
> >>
> >> 2014-03-22 0:17 GMT+03:00 Ty Featherling <tyfeatherl...@gmail.com>:
> >>
> >>> I am replacing a Cisco 2950 with a CCR1036. I will have sfp1 connected
> to
> >>> an incoming trunk carrying VLANs 50 and 51. I need sfp2, 3, an 4 setup
> as
> >>> ACCESS VLAN 50 and ether1 as ACCESS VLAN 51. Does this look right?
> >>>
> >>> /interface bridge
> >>> add l2mtu=1590 name=bridgeACCESS-50
> >>> add name=bridgeACCESS-51
> >>> add name=bridgeTRUNK
> >>>
> >>> /interface vlan
> >>> add interface=bridgeTRUNK l2mtu=65531 name=vlan50 vlan-id=50
> >>> add interface=bridgeTRUNK l2mtu=65531 name=vlan51 vlan-id=51
> >>>
> >>> /interface bridge port
> >>> add bridge=bridgeACCESS-50 interface=ether3
> >>> add bridge=bridgeACCESS-50 interface=vlan50
> >>> add bridge=bridgeACCESS-51 interface=vlan51
> >>> add bridge=bridgeTRUNK interface=sfp1
> >>> add bridge=bridgeACCESS-50 interface=sfp2
> >>> add bridge=bridgeACCESS-50 interface=sfp3
> >>> add bridge=bridgeACCESS-50 interface=sfp4
> >>> add bridge=bridgeACCESS-51 interface=ether1
> >>>
> >>> Thanks,
> >>> Ty
> >>> -------------- next part --------------
> >>> An HTML attachment was scrubbed...
> >>> URL: <
> >>>
> >>
> http://mail.butchevans.com/pipermail/mikrotik/attachments/20140321/3e496536/attachment.html
> >>>>
> >>> _______________________________________________
> >>> Mikrotik mailing list
> >>> Mikrotik@mail.butchevans.com
> >>> http://mail.butchevans.com/mailman/listinfo/mikrotik
> >>>
> >>> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
> >>> RouterOS
> >>>
> >> -------------- next part --------------
> >> An HTML attachment was scrubbed...
> >> URL: <
> >>
> http://mail.butchevans.com/pipermail/mikrotik/attachments/20140322/46424afb/attachment.html
> >>>
> >> _______________________________________________
> >> Mikrotik mailing list
> >> Mikrotik@mail.butchevans.com
> >> http://mail.butchevans.com/mailman/listinfo/mikrotik
> >>
> >> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
> >> RouterOS
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> http://mail.butchevans.com/pipermail/mikrotik/attachments/20140321/e871e009/attachment.html
> >
> > _______________________________________________
> > Mikrotik mailing list
> > Mikrotik@mail.butchevans.com
> > http://mail.butchevans.com/mailman/listinfo/mikrotik
> >
> > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
> RouterOS
>
> _______________________________________________
> Mikrotik mailing list
> Mikrotik@mail.butchevans.com
> http://mail.butchevans.com/mailman/listinfo/mikrotik
>
> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
> RouterOS
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://mail.butchevans.com/pipermail/mikrotik/attachments/20140324/f2980090/attachment.html>
_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://mail.butchevans.com/mailman/listinfo/mikrotik

Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS

Reply via email to