/tool torch etherX
Example:
[admin@MikroTik] /tool> torch ether1
TX RX TX-PACKETS RX-PACKETS
2.8kbps 9.5kbps 2 8
2.8kbps 9.5kbps 2 8
Sincerely,
Eric Tykwinski
TrueNet, Inc.
P: 610-429-8300
F: 610-429-3222
-----Original Message-----
From: mikrotik-boun...@mail.butchevans.com
[mailto:mikrotik-boun...@mail.butchevans.com] On Behalf Of Paul McCall
Sent: Wednesday, February 25, 2015 4:22 PM
To: Mikrotik discussions
Subject: [Mikrotik] Measureing LIVE bandwith on Ethernet Interface
We want to do the following, either using telnet or the API.
Start a 10 second BW test back to our core from Ether1
While that test is running, grab the current used BW for Ether1.
Example:
BH link is currently passing 40Mbit of normal customer traffic before the
test. If the BW test back to the core is adding another 50 Mbit of usage,
that interface would show 90Mbit if we are logged in to the TIK.
We want to find that value (90Mbit ) through Telnet or API.
Any thoughts?
Paul McCall, Pres.
PDMNet / Florida Broadband
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800 office
772-473-0352 cell
www.pdmnet.com<http://www.pdmnet.com/>
pa...@pdmnet.net<mailto:pa...@pdmnet.net>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://mail.butchevans.com/pipermail/mikrotik/attachments/20150225/8ecc8c0b
/attachment.html>
_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
