Thanks. Yes, I git cloned and built as dom0, xen and u-boot as in the doc. I just looked at my log, there's a bit at the end I missed. Here's the entire log, I've highlighted the last part. Looks like some build parameter went missing, complaining that its not in NS Hyp mode....
U-Boot 2014.04-01572-gea1ac32 (Jul 12 2015 - 01:41:38) Allwinner Technology CPU: Allwinner A20 (SUN7I) Board: Cubieboard2 I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: dwmac.1c50000 Hit any key to stop autoboot: 0 reading uEnv.txt ** Unable to read file uEnv.txt ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** *reading boot.scr* *1243 bytes read in 21 ms (57.6 KiB/s)* *Jumping to boot.scr* *## Executing script at 44000000* *reading /xen* *688912 bytes read in 56 ms (11.7 MiB/s)* *reading /sun7i-a20-cubieboard2.dtb* *20757 bytes read in 29 ms (698.2 KiB/s)* *reading /vmlinuz* *5284760 bytes read in 263 ms (19.2 MiB/s)* *Kernel image @ 0x7ea00000 [ 0x000000 - 0x0ef700 ]* *## Flattened Device Tree blob at 7ec00000* * Booting using the fdt blob at 0x7ec00000* * reserving fdt memory region: addr=7ec00000 size=6000* * Using Device Tree in place at 7ec00000, end 7ec08fff* *Starting kernel ...* *- UART enabled -* *- CPU 00000000 booting -* *- Xen must be entered in NS Hyp mode -* *- Boot failed -* On Sun, Jul 19, 2015 at 5:30 PM, Luke Dunstan <[email protected]> wrote: > I was going to ask whether you downloaded a pre-built image from > http://blobs.openmirage.org/ but that site doesn't seem to be available > at the moment, so I guess you built an image? But regardless of that, first > try writing the image to the card again with "dd", as I've occasionally had > that step fail to work. > > The early output of a successful boot looks like this (depending on the > version of U-Boot): > > U-Boot 2014.04-01540-ga74a847 (Jun 26 2015 - 14:22:47) Allwinner Technology > > CPU: Allwinner A20 (SUN7I) > Board: Cubieboard2 > I2C: ready > DRAM: 1 GiB > MMC: SUNXI SD/MMC: 0 > *** Warning - bad CRC, using default environment > > In: serial > Out: serial > Err: serial > Net: dwmac.1c50000 > Hit any key to stop autoboot: 0 > reading uEnv.txt > ** Unable to read file uEnv.txt ** > Failed to mount ext2 filesystem... > ** Unrecognized filesystem type ** > Failed to mount ext2 filesystem... > ** Unrecognized filesystem type ** > reading boot.scr > 1243 bytes read in 22 ms (54.7 KiB/s) > Jumping to boot.scr > ## Executing script at 44000000 > > > The warning about ext2 is not likely to be related to your problem. > > Luke > > > On Mon, 20 Jul 2015 at 04:03 Mukund Parthasarathy <[email protected]> > wrote: > >> Hello- >> Trying to set up my cubieboard2 per >> https://mirage.io/wiki/xen-on-cubieboard2. >> >> Xen won't boot, looks like it is expecting ext2 filesystem, rather than >> ext4: >> >> *U-Boot 2014.04-01572-gea1ac32 (Jul 12 2015 - 01:41:38) Allwinner >> Technology* >> >> *CPU: Allwinner A20 (SUN7I)* >> *Board: Cubieboard2* >> *I2C: ready* >> *DRAM: 1 GiB* >> *MMC: SUNXI SD/MMC: 0* >> **** Warning - bad CRC, using default environment* >> >> *In: serial* >> *Out: serial* >> *Err: serial* >> *Net: dwmac.1c50000* >> *Hit any key to stop autoboot: 0* >> *reading uEnv.txt* >> *** Unable to read file uEnv.txt *** >> *Failed to mount ext2 filesystem...* >> *** Unrecognized filesystem type *** >> *Failed to mount ext2 filesystem...* >> *** Unrecognized filesystem type *** >> >> >> Boot fails....any ideas? Please let me know if I should be posting on a >> different DL, Ultimately, I'd like to run a mirageos unikernal... >> _______________________________________________ >> MirageOS-devel mailing list >> [email protected] >> http://lists.xenproject.org/cgi-bin/mailman/listinfo/mirageos-devel >> >
_______________________________________________ MirageOS-devel mailing list [email protected] http://lists.xenproject.org/cgi-bin/mailman/listinfo/mirageos-devel
