hello,
the sk integrated in the MSI K8N Neo4 Platinum mainboard of this machine
is giving "device not configured". the following message appears
(full dmesg below):
skc0: bad VPD resource id: expected 82 got 0
also, the fd0 device is not recognized. it works fine with an i386 kernel.
thanks for any suggestions.
steven
OpenBSD 3.7-current (GENERIC) #89: Tue May 10 12:44:38 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2147020800 (2096700K)
avail mem = 1836572672 (1793528K)
using 22937 buffers containing 214908928 bytes (209872K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3800+, 2412.63 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
vendor "Nvidia", unknown product 0x005e (class memory subclass miscellaneous,
rev 0xa3) at pci0 dev 0 function 0 not configured
vendor "Nvidia", unknown product 0x0050 (class bridge subclass ISA, rev 0xa3)
at pci0 dev 1 function 0 not configured
"Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 vendor "Nvidia", unknown product 0x005a rev
0xa2: irq 10, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 vendor "Nvidia", unknown product 0x005b rev
0xa3: irq 11
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: Nvidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
auich0 at pci0 dev 4 function 0 "Nvidia nForce4 AC-97" rev 0xa2: irq 12,
nForce4 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850)
audio0 at auich0
pciide0 at pci0 dev 6 function 0 "Nvidia nForce4 IDE" rev 0xa2: DMA
(unsupported), channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD2000JB-00GVA0>
wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors
pciide0: channel 1 ignored (not responding; disabled or no drives?)
ppb0 at pci0 dev 9 function 0 vendor "Nvidia", unknown product 0x005c rev 0xa2
pci1 at ppb0 bus 1
"VIA VT6306 FireWire" rev 0x80 at pci1 dev 12 function 0 not configured
pciide1 at pci1 dev 13 function 0 "CMD Technology SiI3114 SATA" rev 0x02: DMA
pciide1: using irq 11 for native-PCI interrupt
"Nvidia CK804 LAN" rev 0xa3 at pci0 dev 10 function 0 not configured
ppb1 at pci0 dev 11 function 0 vendor "Nvidia", unknown product 0x005d rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 vendor "Nvidia", unknown product 0x005d rev 0xa3
pci3 at ppb2 bus 3
skc0 at pci3 dev 0 function 0 "Marvell Yukon 8053" rev 0x15: irq 11
skc0: bad VPD resource id: expected 82 got 0
skc0: Marvell Yukon (Unknown) Gigabit Ethernet (0x1)
sk0 at skc0 port A: address 00:0c:76:4e:e6:68
skc0: unknown device type 182sk1 at skc0 port B: address 00:0c:76:4e:e6:68
skc0: unknown device type 182ppb3 at pci0 dev 13 function 0 vendor "Nvidia",
unknown product 0x005d rev 0xa3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 vendor "Nvidia", unknown product 0x005d rev 0xa3
pci5 at ppb4 bus 5
vga1 at pci5 dev 0 function 0 "ATI Radeon X300" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon X300 Sec" rev 0x00 at pci5 dev 0 function 1 not configured
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627THF
umass0 at uhub1 port 8 configuration 1 interface 0
umass0: USB2.0 External Mass Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets
cd0 at scsibus0 targ 1 lun 0: <LITE-ON, DVDRW LDW-851S, GS0C> SCSI0 5/cdrom
removable
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
