After rebooting our 3.6 OBSD server my users started complaining about
restrictions in mail attachments.
Appearantly anything over 15mg gets (timed out?) or otherwise does not
go out. We use Postfix and pop3d.
If you have heard of this happening before, or it has happened to you
let me know. I've included my dmesg
if that helps. Thanks.
_____________________________
John F. Marten III
Information Technology Specialist
Balzhiser & Hubbard Engineers
CI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable,
self powered
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x30: irq
12
ac97: codec id 0x56494161 (VIA Technologies VT1612A)
ac97: codec features
headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr0 at pci0
dev 18 function 0 "VIA RhineII-2" rev 0x70: irq 5 address 00:07:95:fd:da:05
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x004063,
model 0x0032, rev. 0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0:
console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0:
<PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0
port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at
isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq
6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef4d
netmask ef6d ttymask efef
pctr: user-level cycle counter enabled
dkcsum: wd0
matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
syncing disks... done
rebooting...
OpenBSD 3.6 (GENERIC) #59: Fri Sep 17
12:32:57 MDT 2004
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R)
Pentium(R) 4 CPU 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACP
I,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem  = 234397696 (228904K)
avail mem =
207007744 (202156K)
using 2886 buffers containing 11821056 bytes (11544K) of
memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 01/21/02,
BIOS32 rev. 0 @ 0xfdad0
apm0 at bios0: Power Management spec V1.2
apm0: AC on,
battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0:
PCI IRQ Routing Table rev 1.0 @ 0xf7c10/112 (5 entries)
pcibios0: PCI
Interrupt Router at 000:17:0 ("VIA VT8366 ISA" rev 0x00)
pcibios0: PCI bus #1
is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1800 0xcd800/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0
at pci0 dev 0 function 0 "VIA VT8751 PCI" rev 0x00
ppb0 at pci0 dev 1 function
0 "VIA VT8633 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0
"S3 ProSavage DDR" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100
emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0
dev 11 function 0 "Intel 82557" rev 0x0c: irq 11, address 00:02:b3:a8:3d:48
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
pcib0 at pci0 dev
17 function 0 "VIA VT8366 ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA
VT82C571 IDE" rev 0x06: ATA100, channel 0 configured to compatibility, channel
1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC
WD200BB-00CFC0>
wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0
channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun
0: <HL-DT-ST, CD-ROM GCR-8521B, 1.00> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 17 function 2
"VIA VT83C572 USB" rev 0x1b: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at
usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports
with 2 removable, self powered
uhci1 at pci0 dev 17 function 3 "VIA VT83C572
USB" rev 0x1b: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA
UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2
removable, self powered
uhci2 at pci0 dev 17 function 4 "VIA VT83C572 USB" rev
0x1b: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI
root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable,
self powered
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x30: irq
12
ac97: codec id 0x56494161 (VIA Technologies VT1612A)
ac97: codec features
headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr0 at pci0
dev 18 function 0 "VIA RhineII-2" rev 0x70: irq 5 address 00:07:95:fd:da:05
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x004063,
model 0x0032, rev. 0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0:
console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0:
<PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0
port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at
isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq
6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef4d
netmask ef6d ttymask efef
pctr: user-level cycle counter enabled
dkcsum: wd0
matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
syncing disks... done
rebooting...
OpenBSD 3.6 (GENERIC) #59: Fri Sep 17
12:32:57 MDT 2004
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R)
Pentium(R) 4 CPU 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACP
I,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem  = 234397696 (228904K)
avail mem =
207007744 (202156K)
using 2886 buffers containing 11821056 bytes (11544K) of
memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 01/21/02,
BIOS32 rev. 0 @ 0xfdad0
apm0 at bios0: Power Management spec V1.2
apm0: AC on,
battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0:
PCI IRQ Routing Table rev 1.0 @ 0xf7c10/112 (5 entries)
pcibios0: PCI
Interrupt Router at 000:17:0 ("VIA VT8366 ISA" rev 0x00)
pcibios0: PCI bus #1
is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1800 0xcd800/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0
at pci0 dev 0 function 0 "VIA VT8751 PCI" rev 0x00
ppb0 at pci0 dev 1 function
0 "VIA VT8633 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0
"S3 ProSavage DDR" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100
emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0
dev 11 function 0 "Intel 82557" rev 0x0c: irq 11, address 00:02:b3:a8:3d:48
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
pcib0 at pci0 dev
17 function 0 "VIA VT8366 ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA
VT82C571 IDE" rev 0x06: ATA100, channel 0 configured to compatibility, channel
1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC
WD200BB-00CFC0>
wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0
channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun
0: <HL-DT-ST, CD-ROM GCR-8521B, 1.00> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 17 function 2
"VIA VT83C572 USB" rev 0x1b: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at
usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports
with 2 removable, self powered
uhci1 at pci0 dev 17 function 3 "VIA VT83C572
USB" rev 0x1b: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA
UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2
removable, self powered
uhci2 at pci0 dev 17 function 4 "VIA VT83C572 USB" rev
0x1b: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI
root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable,
self powered
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x30: irq
12
ac97: codec id 0x56494161 (VIA Technologies VT1612A)
ac97: codec features
headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr0 at pci0
dev 18 function 0 "VIA RhineII-2" rev 0x70: irq 5 address 00:07:95:fd:da:05
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x004063,
model 0x0032, rev. 0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0:
console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0:
<PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0
port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at
isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq
6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef4d
netmask ef6d ttymask efef
pctr: user-level cycle counter enabled
dkcsum: wd0
matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: un\M-able to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to
enter address for 207.189.153.101
arplookup: unable to enter address for
207.189.153.101
arplookup: unable to enter address for 207.189.153.101
arplookup: unable to enter address for 207.189.153.101
syncing disks... done
rebooting...
OpenBSD 3.6 (GENERIC) #59: Fri Sep 17 12:32:57 MDT 2004
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R)
Pentium(R) 4 CPU 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACP
I,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem  = 234397696 (228904K)
avail mem =
207007744 (202156K)
using 2886 buffers containing 11821056 bytes (11544K) of
memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 01/21/02,
BIOS32 rev. 0 @ 0xfdad0
apm0 at bios0: Power Management spec V1.2
apm0: AC on,
battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0:
PCI IRQ Routing Table rev 1.0 @ 0xf7c10/112 (5 entries)
pcibios0: PCI
Interrupt Router at 000:17:0 ("VIA VT8366 ISA" rev 0x00)
pcibios0: PCI bus #1
is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1800 0xcd800/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0
at pci0 dev 0 function 0 "VIA VT8751 PCI" rev 0x00
ppb0 at pci0 dev 1 function
0 "VIA VT8633 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0
"S3 ProSavage DDR" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100
emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0
dev 11 function 0 "Intel 82557" rev 0x0c: irq 11, address 00:02:b3:a8:3d:48
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
pcib0 at pci0 dev
17 function 0 "VIA VT8366 ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA
VT82C571 IDE" rev 0x06: ATA100, channel 0 configured to compatibility, channel
1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC
WD200BB-00CFC0>
wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0
channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun
0: <HL-DT-ST, CD-ROM GCR-8521B, 1.00> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 17 function 2
"VIA VT83C572 USB" rev 0x1b: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at
usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports
with 2 removable, self powered
uhci1 at pci0 dev 17 function 3 "VIA VT83C572
USB" rev 0x1b: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA
UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2
removable, self powered
uhci2 at pci0 dev 17 function 4 "VIA VT83C572 USB" rev
0x1b: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI
root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable,
self powered
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x30: irq
12
ac97: codec id 0x56494161 (VIA Technologies VT1612A)
ac97: codec features
headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr0 at pci0
dev 18 function 0 "VIA RhineII-2" rev 0x70: irq 5 address 00:07:95:fd:da:05
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x004063,
model 0x0032, rev. 0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0:
console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0:
<PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0
port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at
isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq
6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef4d
netmask ef6d ttymask efef
pctr: user-level cycle counter enabled
dkcsum: wd0
matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

Reply via email to