Hi List Since I updated Kernel to -current my System frequently freezes. I'm not even able to build userland.
It freezes on any APM activities like switching off display, reboot or power off. And it also freezes on using special keys (i.e. Fn-Font) Any idea? dmesg is attached. Are there some more informations that I could provide? Marc OpenBSD 3.7-current (GENERIC) #6: Sun Jun 5 17:14:05 CEST 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III ("GenuineIntel" 686-class) 748 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 536363008 (523792K) avail mem = 482586624 (471276K) using 4278 buffers containing 26923008 bytes (26292K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 01/21/04, BIOS32 rev. 0 @ 0xffe90 apm0 at bios0: Power Management spec V1.2 apm0: battery life expectancy 48% apm0: AC on, battery charge high, charging, estimated 2:03 hours apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbc20/192 (10 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev 0x00) pcibios0: PCI bus #4 is the last bus bios0: ROM list: 0xc0000/0x10000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x02: rng active, 8Kb/sec ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x02 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Rage 128 Mobility MF" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x02 pci2 at ppb1 bus 2 esa0 at pci2 dev 3 function 0 "ESS Maestro 3" rev 0x10: irq 5 ac97: codec id 0x83847609 (SigmaTel STAC9721/23) ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D audio0 at esa0 xl0 at pci2 dev 6 function 0 "3Com 3c556 100Base-TX" rev 0x10: irq 10, address 00:00:86:4f:33:7e tqphy0 at xl0 phy 0: 78Q2120 10/100 PHY, rev. 11 "3Com V.90 Modem" rev 0x10 at pci2 dev 6 function 1 not configured cbb0 at pci2 dev 15 function 0 "Texas Instruments PCI4451 CardBus" rev 0x00: irq 10 cbb1 at pci2 dev 15 function 1 "Texas Instruments PCI4451 CardBus" rev 0x00: irq 10 "Texas Instruments PCI4451 FireWire" rev 0x00 at pci2 dev 15 function 2 not configured cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20 pcmcia1 at cardslot1 ichpcib0 at pci0 dev 31 function 0 "Intel 82801BAM LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel 82801BAM IDE" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <FUJITSU MHS2060AT> wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors atapiscsi0 at pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2402, 1009> SCSI0 5/cdrom removable wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x02: irq 10 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ef45 netmask ef45 ttymask ffc7 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matched BIOS disk 80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 WARNING: / was not properly unmounted