Hi list.
I have a pc (Dell Optiplex) with openbsd 3.7, which
will be firewall, but in this morning I found my pc
with this error message:
~panic: pool_get(mclpl): free list modified:
magic=deafaaaa; page 0xd3b38000;
item addr 0xd3b38000
Sropped at Debuger+0x4: leave
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN
REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING
THAT INFORMATION!
ddb>
This is my dmesg:
--------------------------------------------------------------------
OpenBSD 3.7 (GENERIC) #0: Tue Jun 28 13:13:45 CDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 930
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 132489216 (129384K)
avail mem = 114380800 (111700K)
using 1642 buffers containing 6725632 bytes (6568K) of
memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 03/07/01,
BIOS32 rev. 0 @ 0xfda74
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2f30/192
(10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel
82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810E" rev 0x03
vga1 at pci0 dev 1 function 0 "Intel 82810E Graphics"
rev 0x03: aperture at 0xf8000000, size 0x4000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA
Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
xl0 at pci1 dev 8 function 0 "3Com 3c905C 100Base-TX"
rev 0x74: irq 11, address 00:01:02:bf:54:56
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY,
rev. 6
xl1 at pci1 dev 9 function 0 "3Com 3c905 100Base-TX"
rev 0x00: irq 10, address 00:60:08:52:d3:06
nsphy0 at xl1 phy 24: DP83840 10/100 PHY, rev. 1
"AT&T/Lucent LTMODEM" rev 0x00 at pci1 dev 11 function
0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC"
rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE"
rev 0x02: DMA, channel 0 wired to compatibility,
channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST320413A>
wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRD-8482B,
1.05> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB"
rev 0x02: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801AA SMBus" rev 0x02 at pci0 dev 31 function
3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console
keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte
fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask f36d netmask ff6d ttymask ffef
pctr: 686-class user-level performance counters
enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
------------------------------------------------------------------
Thanks for your help !!!!
