Just out of curiosity, anyone have Dual/Display xorg.config file for a Radeon 9600Pro? I cannot seem to get mine working, and I was wondering if it had something to do with the fact that the second "head" wasn't identified in the kernel. Dmesg below.
Thanks in advance, OpenBSD 3.7-current (GENERIC) #128: Thu Jun 9 12:39:08 MDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 1072492544 (1047356K) avail mem = 908529664 (887236K) using 22937 buffers containing 107458560 bytes (104940K) of memory mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: AMD Athlon(tm) 64 Processor 3000+, 2002.89 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "VIA K8HTB Host" rev 0x01 ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon 9600 Pro" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "ATI Radeon 9600 Pro Sec" rev 0x00 at pci1 dev 0 function 1 not configured "VIA VT6306 FireWire" rev 0x80 at pci0 dev 7 function 0 not configured skc0 at pci0 dev 10 function 0 "Marvell SKv2" rev 0x13: irq 5 skc0: Marvell Yukon Lite rev. A3 (0x7) sk0 at skc0 port A: address 00:11:2f:8d:91:8f eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 pciide0 at pci0 dev 15 function 0 "VIA VT8237 SATA" rev 0x80: DMA pciide0: using irq 5 for native-PCI interrupt pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide1 channel 0 drive 0: <ST380011A> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd1 at pciide1 channel 0 drive 1: <ST340016A> wd1: 16-sector PIO, LBA, 38166MB, 78165360 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide1 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <SONY, DVD-ROM DDU1621, S1.5> SCSI0 5/cdrom removable atapiscsi1 at pciide1 channel 1 drive 1 scsibus1 at atapiscsi1: 2 targets cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4081B, A100> SCSI0 5/cdrom removable cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2 cd1(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 2 uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 11 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 5 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 5 usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 3 usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered "VIA VT8237 ISA" rev 0x00 at pci0 dev 17 function 0 not configured auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 3 ac97: codec id 0x41445370 (Analog Devices AD1980) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auvia0 pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 isa0 at mainbus0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 lm0 at isa0 port 0x290/8: W83697HF uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 wd0: no disk label dkcsum: wd0 matched BIOS disk 80 dkcsum: wd1 matched BIOS disk 81 root on wd1a rootdev=0x10 rrootdev=0x310 rawdev=0x312 uhub5 at uhub3 port 1 uhub5: Motorola MC141555 hub controller, class 9/0, rev 1.00/1.00, addr 2 uhub5: 5 ports with 5 removable, self powered uhub6 at uhub3 port 2 uhub6: Motorola MC141555 hub controller, class 9/0, rev 1.00/1.00, addr 3 uhub6: 5 ports with 5 removable, self powered uhub5: device problem, disabling port 5 uhub6: device problem, disabling port 5