And you dont know how to reassign the release key?
On Wed, Jul 27, 2005 at 11:22:56PM +0200, Johan P. Lindstrvm wrote:
> Just finished installing OpenBSD 3.7 from CD onto VM Ware Workstation
> 5 build 13124 with Windows XP sp2 as host OS.
>
> As Client OS I chose FreeBSD, VM Ware tools not installed, virtual
> terminals CTRL+ALT+Fn does not work since CTRL+ALT releases control
> from the VM Ware application.
>
> Here is the dmesg.boot
>
> OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,PNI
> real mem = 267952128 (261672K)
> avail mem = 237731840 (232160K)
> using 3296 buffers containing 13500416 bytes (13184K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(a5) BIOS, date 02/11/05, BIOS32 rev. 0 @ 0xfd880
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> pcibios0 at bios0: rev 2.1 @ 0xfd880/0x780
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xdc000/0x4000! 0xe0000/0x4000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x01
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x01
> pci1 at ppb0 bus 1
> pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x08
> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> wd0 at pciide0 channel 0 drive 0: <VMware Virtual IDE Hard Drive>
> wd0: 64-sector PIO, LBA, 4096MB, 8388608 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-3520A, 1.04> SCSI0
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x00: irq 9
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> "Intel 82371AB Power Mgmt" rev 0x08 at pci0 dev 7 function 3 not configured
> vga1 at pci0 dev 15 function 0 "VMware Virtual SVGA II" rev 0x00
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> mpt0 at pci0 dev 16 function 0 "Symbios Logic 53c1030" rev 0x01: irq 11
> mpt0: running in vmware, skipping pageretrieval
> mpt0: IM support: 0
> scsibus1 at mpt0: 16 targets
> le1 at pci0 dev 17 function 0 "AMD 79c970 PCnet-PCI" rev 0x10: irq 10
> le1: address 00:0c:29:91:ef:ac
> le1: 8 receive buffers, 2 transmit buffers
> eap0 at pci0 dev 18 function 0 "Ensoniq AudioPCI97" rev 0x02: irq 9
> ac97: codec id 0x43525913 (Cirrus Logic CS4297A rev 3)
> audio0 at eap0
> midi0 at eap0: <AudioPCI MIDI UART>
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
> wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi1 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask eb65 netmask ef65 ttymask ffe7
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
