James Boothe wrote:
> I'm having a bit of trouble with ccd. I have a box with 2 80G IDE
> drives and 1 200G IDE drive. I'm going by the FAQ step for step
> here but after the ccd is configured and I get ready to run
> disklabel -E ccd0 it only sees the first frive. I've redone it 6 or
> 7 times, and switched the drive order in ccd.conf. I've tried
> taking each drive out one at a time and doing it with the other two
> drives but it always ends up the same. I'm hoping somebody can
> help me out here. Hre's what I have in ccd.conf
>
> ccd0 16 none /dev/wd2a /dev/wd1a /dev/wd0h
>
> wd2a is the 200G drive with one big empty partition
> wd1a is one of the 80G drives with one big empty partition
> wd0h is 78G, the other 2 went to the OS
>
> Any help or ideas would be appreciated. If there is any relevent
> information I left out let me know.
Show us what you are seeing and tell us what you are expecting to see.
Yes, "disklabel -E ccd0" should only show you one "drive", so I have no
idea what you are not seeing that you are expecting.
("trivial" little things like dmesg, disklabel and fdisk outputs might
be useful, too).
Nick.
