My computer just locked up and I rebooted.
When I did so the reboot hung right after the line below starting with bios0.
I powered down, then up, then booted again, this time successfully.
But I noticed that the bios id seems to be for a 286. I never noticed that
before.
Unfortunately, I don't have any old copies of dmesg to compare.
I'm running on a Dell 4100. Does the bios id seem correct?
Thanks,
Dave Feustel
OpenBSD 3.6 (GENERIC) #59: Fri Sep 17 12:32:57 MDT 2004
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 797 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 536190976 (523624K)
avail mem = 482353152 (471048K)
using 4278 buffers containing 26910720 bytes (26280K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/17/01, BIOS32 rev. 0 @ 0xfda74
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2c30/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcb000/0x800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x02: rng active, 7Kb/sec
ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage Fury" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x02
pci2 at ppb1 bus 2
pciide0 at pci2 dev 9 function 0 "CMD Technology PCI0680" rev 0x02
pciide0: bus-master DMA support present
pciide0: channel 0 configured to native-PCI mode
pciide0: using irq 9 for native-PCI interrupt
pciide0: channel 1 configured to native-PCI mode
xl0 at pci2 dev 10 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 11,
address 00:01:03:23:4c:b3
exphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 7
ohci0 at pci2 dev 11 function 0 "NEC USB" rev 0x41: irq 11, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci2 dev 11 function 1 "NEC USB" rev 0x41: irq 10, version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci2 dev 11 function 2 "NEC USB 2.0" rev 0x01: irq 9
ehci0: EHCI version 0.95
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
ppb2 at pci2 dev 12 function 0 vendor "Texas Instruments", unknown product
0xac23 rev 0x02
pci3 at ppb2 bus 3
sis0 at pci3 dev 0 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 10,
address 00:00:24:c3:4c:c0
nsphyter0 at sis0 phy 0: DP83815 10/100 integrated, rev. 1
sis1 at pci3 dev 1 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 9,
address 00:00:24:c3:4c:c1
nsphyter1 at sis1 phy 0: DP83815 10/100 integrated, rev. 1
sis2 at pci3 dev 2 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 11,
address 00:00:24:c3:4c:c2
nsphyter2 at sis2 phy 0: DP83815 10/100 integrated, rev. 1
sis3 at pci3 dev 3 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 11,
address 00:00:24:c3:4c:c3
nsphyter3 at sis3 phy 0: DP83815 10/100 integrated, rev. 1
eap0 at pci2 dev 13 function 0 "Ensoniq AudioPCI97" rev 0x07: irq 9
ac97: codec id 0x83847608 (SigmaTel STAC9708/11)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at eap0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x02
pciide1 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x02: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide1 channel 0 drive 1: <MAXTOR 6L080J4>
wd0: 16-sector PIO, LBA, 76345MB, 156355584 sectors
wd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, DVD-ROM SD-612, 0.5> SCSI0 5/cdrom
removable
atapiscsi1 at pciide1 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <LITE-ON, DVDRW SOHW-812S, US05> SCSI0 5/cdrom
removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x02: irq 3
usb3 at uhci0: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
"Intel 82801BA SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef6d netmask ef6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uhub4 at uhub3 port 1
uhub4: Genesys Logic USB Hub, class 9/0, rev 1.01/0.12, addr 2
uhub4: 4 ports with 4 removable, self powered
ugen0 at uhub4 port 3
ugen0: 3Com 3Com HomeConnect USB Camera, rev 1.00/1.06, addr 3
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: OnSpec Pocket DigiDrive, rev 1.10/1.04, addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <OEI-USB, MMC/SD, 1.04> SCSI0 0/direct removable
sd0: drive offline
sd1 at scsibus2 targ 1 lun 1: <OEI-USB, SmartMedia, 1.04> SCSI0 0/direct
removable
sd1: drive offline
sd2 at scsibus2 targ 1 lun 2: <OEI-USB, CompactFlash, 1.04> SCSI0 0/direct
removable
sd2: drive offline
sd3 at scsibus2 targ 1 lun 3: <OEI-USB, Memory Stick, 1.04> SCSI0 0/direct
removable
sd3: drive offline
/var: optimization changed from SPACE to TIME
