Hello List,
I have been successfully communicating to an Alpha and Sparc64 via serial
tty00 and tty01 in fvwm term as root # cu -l tty00
When I try to set this at boot there is a blinking cursor
boot> set tty com0
switching to serial console com0
_
I have tried editing /etc/ttys
tty00 "/usr/libexec/getty std.9600" vt220 on secure
This is on 3.8-beta i386
I don't know if I understand that a host i386 is unable to do this at boot
time.
This is on an IBM x220
Any assitance on this is appreciated.
Here is my ttys file, let me know if any other info. is required.
Thank you,
rogern
# $OpenBSD: ttys,v 1.17 2002/06/09 06:15:14 todd Exp $
#
# name getty type status comments
#
console "/usr/libexec/getty Pc" vt220 off secure
ttyC0 "/usr/libexec/getty Pc" vt220 on secure
ttyC1 "/usr/libexec/getty Pc" vt220 on secure
ttyC2 "/usr/libexec/getty Pc" vt220 on secure
ttyC3 "/usr/libexec/getty Pc" vt220 on secure
ttyC4 "/usr/libexec/getty Pc" vt220 off secure
ttyC5 "/usr/libexec/getty Pc" vt220 on secure
ttyC6 "/usr/libexec/getty Pc" vt220 off secure
ttyC7 "/usr/libexec/getty Pc" vt220 off secure
ttyC8 "/usr/libexec/getty Pc" vt220 off secure
ttyC9 "/usr/libexec/getty Pc" vt220 off secure
ttyCa "/usr/libexec/getty Pc" vt220 off secure
ttyCb "/usr/libexec/getty Pc" vt220 off secure
tty00 "/usr/libexec/getty std.9600" unknown off
tty01 "/usr/libexec/getty std.9600" unknown off
tty02 "/usr/libexec/getty std.9600" unknown off
tty03 "/usr/libexec/getty std.9600" unknown off
tty04 "/usr/libexec/getty std.9600" unknown off
tty05 "/usr/libexec/getty std.9600" unknown off
tty06 "/usr/libexec/getty std.9600" unknown off
tty07 "/usr/libexec/getty std.9600" unknown off
_________________________________________________________________
On the road to retirement? Check out MSN Life Events for advice on how to
get there! http://lifeevents.msn.com/category.aspx?cid=Retirement
