On 23 Aug 2005, at 01:33, Theo de Raadt wrote:
We are heading towards making the real 3.8 release soonish. I would
like to ask the community to do lots of testing over the next week if
they can.
For info, here is the latest 3.8 i386 snapshot booting on a 'common
corporate workhorse' HP DL360, w/ 3GB RAM & 2xCPU and single RAID1
logical disk.
Notes:
1. micky's new ciss raid driver work very well, although spits a few
"ciss0: cmd_stat 2 scsi_stat 0x0" from time to time.
2. The second NIC (bge1) fails to be attached on a single processor
kernel. Anyone got any suggestions for BIOS/boot tweaks to get this
working ?
3. if bsd.mp is booted then it drops into ddb> trying to attach bge1.
I can try for a com port ps & trace if requested.
4. as mentioned in theo's mail 09-09-2005, bioctl supports only ami so
far - I wonder if ciss support is likely ? a documentation issue I
suspect.
5. dmesg below:
OpenBSD 3.8 (GENERIC) #137: Thu Sep 1 17:41:20 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 3220783104 (3145296K)
avail mem = 2931396608 (2862692K)
using 4278 buffers containing 161140736 bytes (157364K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5
SouthBridge" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xee000/0x2000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE" rev 0x31
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE" rev 0x00
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE" rev 0x00
pci1 at pchb2 bus 1
bge0 at pci1 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2
(0x1002): irq 11 address 00:0b:cd:4e:4a:3a
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ciss0 at pci0 dev 4 function 0 "Compaq Smart Array 5i/532 rev.2" rev
0x01: irq 3
ciss0: 1 LD HW rev 1 FW 2.36/2.36
lmap 40000000:0 scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <COMPAQ, LOGICAL VOLUME, 2.36> SCSI0
0/direct fixed
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
sd0: 34727MB, 34727 cyl, 64 head, 32 sec, 512 bytes/sec, 71122560 sec
total
vendor "Compaq", unknown product 0xb203 (class system subclass
miscellaneous, rev 0x01) at pci0 dev 5 function 0 not configured
vendor "Compaq", unknown product 0xb204 (class system subclass
miscellaneous, rev 0x01) at pci0 dev 5 function 2 not configured
pcib0 at pci0 dev 15 function 0 "ServerWorks CSB5 SouthBridge" rev 0x93
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-ROM SN-124, N104> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05:
irq 10, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 PCI" rev 0x00
pchb4 at pci0 dev 17 function 0 "ServerWorks CIOBX2" rev 0x05
pchb5 at pci0 dev 17 function 2 "ServerWorks CIOBX2" rev 0x05
pci2 at pchb5 bus 4
bge1 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02: couldn't
establish interrupt at irq 15
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e7ed netmask efed ttymask ffef
pctr: user-level cycle counter enabled
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
#
#
